MCQ
A disc having velocity $v_0$ and angular speed ${\omega _0}$ in anticlockwise direction kept on the rough plank. Initially plank is at rest. (assuming length of plank is very large) Choose $INCORRECT$ option
  • A
    Friction force on the disc is in backward direction till pure rolling start.
  • B
    Friction force between disc and plank is kinetic in nature till pure rolling start.
  • C
    Total momentum of system (disc and plank) is conserved.
  • Angular momentum of disc about any point on the horizontal surface remains conserved.

Answer

Correct option: D.
Angular momentum of disc about any point on the horizontal surface remains conserved.
d
Initial velocity of point of contact of disc is in forward direction.Hence friction backward direction and kinetic in nature.Net force on the system is zero. So momentum is conserved.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Two long wires are hanging freely. They are joined first in parallel and then in series and then are connected with a battery. In both cases, which type of force acts between the two wires
Both the blocks shown here are of mass $m$ and are moving with constant velocity in direction shown in a resistive medium which exerts equal constant force on both blocks in direction opposite to the velocity. The tension in the string connecting both of them will be : (Neglect friction)
$Assertion$ : When a particle moves in a circle with a uniform speed, its velocity and acceleration both changes.

$Reason$ : The centripetal acceleration in circular motion is dependent on angular velocity of the body.

The magnitude of a given vector with end points $ (4, -4, 0)$ and $(-2, -2, 0)$ must be
A ray of light travelling in a transparent medium falls on a surface separating the medium from air at an angle of incidence of $45^o $. The ray undergoes total internal reflection. If n is the refractive index of the medium with respect to air, select the possible value ($s$) of n from the following
Two immiscible liquid are filled in conical flask as shown in figure. The area of cross section is shown, a small hole of area a is made in lower end of cone. Find speed of liquid flow from hole
The phase difference between two $SHM\,\,$  ${y_1}\, = \,10\,\sin \,\left( {10\pi t\, + \,\frac{\pi }{3}} \right)$ and ${y_2}\, = \,12\,\sin \,\left( {8\pi t\, + \,\frac{\pi }{4}} \right)$  at $t = 0.5\,s$ it
It is necessary to coat a glass lens with a non-reflecting layer. If the wavelength of the light in the coating is $\lambda$ , the best choice is a layer of material having an index of refraction between those of glass and air and a thickness of
A certain $p-n$ junction, having a depletion region of width $20 \,\mu m$, was found to have a breakdown voltage of $100 \,V$. If the width of the depletion region is reduced to $1 \,\mu m$ during its production, then it can be used as a zener diode for voltage regulation of .......... $V$
In the given figure the total charge stored in the combination of capacitors is $100\,\mu C$. The value of ' $x$ ' is $............$.