MCQ
A galvanometer has $30$ divisions and a sensitivity $16\,\mu A/{\rm{div}}{\rm{.}}$ It can be converted into a voltmeter to read $3\, V$ by connecting
  • Resistance nearly $6 \,k\,\Omega $ in series
  • B
    $6\,k\,\Omega $ in parallel
  • C
    $500\,\Omega $ in series
  • D
    It cannot be converted

Answer

Correct option: A.
Resistance nearly $6 \,k\,\Omega $ in series
a
(a) $(R + G)\,{i_g} = V$

$ \Rightarrow $ $(R + G) = \frac{V}{{{i_g}}}$

$ = \frac{3}{{30 \times 16 \times {{10}^{ - 6}}}} = 6.25\,k\Omega $

$\therefore $ Value of $R$ is nearly equal to $6\,k\Omega $

This is connected in series in a voltmeter.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Which of the following transition will have highest emission wavelength
If a current of $10 \,A$ flows in one second through a coil, and the induced $e.m.f$. is $10\, V$, then the self-inductance of the coil is  
The range of a particle when launched at an angle of ${15^o}$ with the horizontal is $1.5 \,km$. What is the range of the projectile when launched at an angle of ${45^o}$ to the horizontal ........ $km$
A balloon starts rising from the ground with an acceleration of $1.25\, m/s^2$ after $8\,s$, a stone is released from the balloon. The stone will ($g = 10 \,m/s^2$)
The distance travelled by a particle is directly proportional to $t^{1/2}$, where $t =$ time elapsed. What is the nature of motion ?
Two infinitely long conducting parallel rails are connected through a capacitor $C$ as shown in the figure. $A$ conductor of length $l$ is moved with constant speed $v_0$.Which of the following graph truly depicts the variation of current through the conductor with time ?
In $L-C-R$ circuit $V$ , $V_R$ , $V_L$ , $V_C$ are voltage of source, resistance, inductance and capacitor at any instant then choose the correct relation 
Which of the following will NOT be observed when a multimeter (operating in resistance measuring mode) probes connected across a component, are just reversed?
In Poiseuilli's method of determination of coefficient of viscosity, the physical quantity that requires greater accuracy in measurement is
If $L , C$ and $R$ denote the inductance, capacitance and resistance respectively, the dimensional formula for $C ^{2} LR$ is