Question
A heating element using nichrome connected to a 230 V supply draws an initial current of 3.2 A which settles after a few seconds to a steady value of 2.8 A. What is the steady temperature of the heating element if the room temperature is 27.0°C? Temperature coefficient of resistance of nichrome averaged over the temperature range involved is $1.70\times10^{-4}{^\circ\text{C}}^{-1}.$

Answer

Here,
Potential applied across the heating element, V = 230 V
Initial current, l1 = 3.2 A
After few seconds, steady current attained is, l2 = 2.8 A
Using ohm's law,
$\text{R}_1=\frac{230}{3.2}=71.87\ \Omega$
and,
$\text{R}_2=\frac{230}{2.8}=82.14\ \Omega$
$\alpha=1.7\times10^{-4}{^\circ\text{C}^{-1}}$
$\text{t}_1=27^\circ\text{C}$
Using the relation,
$\text{R}_2=\text{R}_1[1+\alpha(\text{t}_2-\text{t}_1)]$
$\text{Therefore,}\ \ \text{t}_2=\frac{\text{R}_2-\text{R}_1}{\text{R}_1.\alpha}+\text{t}_1$
$\Rightarrow\ \ \text{t}_2=\frac{82.14-71.87}{71.87\times1.7\times10^{-4}}+27$
$=840.56+27$
$=867.56^\circ\text{C}$
$=867^\circ\text{C}$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Consider a 10cm long piece of a wire which carries a current of 10A. Find the magnitude of the magnetic field due to the piece at a point which makes an equilateral triangle with the ends of the piece.
A sphere of mass 20kg is suspended by a metal wire of unstretched length 4m and diameter 1mm. When in equilibrium, there is a clear gap of 2mm between the sphere and the floor. The sphere is gently pushed aside so that the wire makes an angle $\theta$ with the vertical and is released. Find the maximum value of $\theta$ so that the sphere does not rub the floor. Young's modulus of the metal of the wire is 2.0 × 1011N/m2. Make appropriate approximations.
2g of hydrogen is sealed in a vessel of volume 0.02m3 and is maintained at 300K. Calculate the pressure in the vessel.
A circular loop of radius R carries a current I. Another circular loop of radius r ( << R) carries a current i and is placed at the centre of the larger loop. The planes of the two circles are at right angle to each other. Find the torque acting on the smaller loop.
A heating element using nichrome connected to a 230 V supply draws an initial current of 4.6 A which settles after a few seconds to a steady value of 2.3 A . What is the steady temperature of the heating element if the room temperature is $27^{\circ} C$. [ $\left.\alpha=1.7 \times 10^{-4}{ }^{\circ} C ^{-1}\right]$
Answer the following question:
Why must both the objective and the eyepiece of a compound microscope have short focal lengths?
What are the advantages of the null-point method in a Wheatstone bridge? What additional measurements would be required to calculate Runknown by any other method?
Calculate the following:

  1. Impedance of the given ac circuit.
  2. Wattless current of the given ac circuit.
A hollow charged conductor has a tiny hole cut into its surface. Show that the electric field in the hole is (σ/2ε0) $\hat{\text{n}}$ , where $\hat{\text{n}}$ is the unit vector in the outward normal direction, and σ is the surface charge density near the hole.
Deduce an expression for the electric potential due to an electric dipole at any point on its axis. Mention one contrasting feature of electric potential of a dipole at a point as compared to that due to a single charge.