A network of four 10 $\mu$F capacitors is connected to a 500 V supply as shown in the figure. Determine the
- equivalent capacitance of the network and.
- charge on each capacitor.
CBSE OUTSIDE DELHI - SET 3 GUHAWATI 2015
Download our app for free and get started
- Equivalent capacitance $(\text{C}_{n}) = \frac{\text{C}}{3} + \text{C}$
- $\text{Charge on } \text{C}_{4}, \text{q}_{4} = \text{C}_{4}\times\text{V}=10\times500 \mu\text{C}$
$\text{Charge on } \text{C}_ {1},\text{C}_{2},\text{C}_{3}\text{ is same and is equal to} \frac{\text{C}}{3}\times\text{V}$
$ = \frac{5}{3}\times10^{-3}\text{C}$
$ = 1.67\text{mC}$.
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1When an inductor L and a resistor R in series are connected across a 12 V, 50 Hz supply, a current of 0.5 A flows in the circuit. The current differs in phase from applied voltage by $\pi/3$ radian. Calculate the value of R.View Solution
- 2View SolutionA series LCR circuit with R = 20Ω, L = 1.5H and C = 35μF is connected to a variable-frequency 200V ac supply. When the frequency of the supply equals the natural frequency of the circuit, what is the average power transferred to the circuit in one complete cycle?
- 3View Solution
- For a glass prism $(\mu =\sqrt{3} )$ the angle of minimum deviation is equal to the angle of the prism. Calculate the angle of the prism.
- Draw ray diagram when incident ray falls normally on one of the two equal sides of a right angled isosceles prism having refractive index $\mu = \sqrt{3} . $
- 4View SolutionFind the time required for a 50Hz alternating current to change its value from zero to the rms value.
- 5Find the equivalent capacitance of the network shown in the figure, when each capacitor is of $1\mu\text{F}$. When the ends X and Y are connected to a 6 V battery, find out (i) The charge and (ii) The energy stored in the network.View Solution
- 6View Solution
- Name the phenomenon on which the working of an optical fibre is based.
- What are the necessary conditions for this phenomenon to occur?
- Draw a labelled diagram of an optical fibre and show how light propagates through the optical fibre using this phenomenon.
- 7View SolutionIn what way is Gauss’s law in magnetism different from that used in electrostatics? Explain briefly. The Earth’s magnetic field at the Equator is approximately 0.4 G. Estimate the Earth’s magnetic dipole moment. Given: Radius of the Earth = 6400 km.
- 8View SolutionExplain briefly, with the help of a circuit diagram, the transistor action of npn transistor in CE configuration. Draw the typical shapes of input and output characteristics.
- 9A coil of inductance 5.0mH and negligible resistance is connected to the oscillator of the previous problem. Find the peak currents in the circuit for $\omega=100\text{s}^{-1},500\text{s}^{-1},1000\text{s}^{-1}.$View Solution
- 10View Solution
- When an AC source is connected to an ideal inductor show that the average power supplied by the source over a complete cycle is zero.
- A lamp is connected in series with an inductor and an AC source. What happens to the brightness if the lamp when the key is plugged in and an iron rod is inserted inside the inductor? Explain.
