A solid sphere of radius R, rotating with an angular velocity abo… - Vidyadip

Question

A solid sphere of radius $R$, rotating with an angular velocity $\omega$ about its diameter, suddenly stops rotating and $75 \%$ of its $\mathrm{KE}$ is converted into heat. If $\mathrm{c}$ is the specific heat capacity of the material in SI units, show that the temperature of $3 \mathrm{R}^2 \mathrm{CO}^2$ the sphere rises by $\frac{3 R^2 \omega^2}{20 c}$.

✓

Answer

The $\mathrm{Ml}$ of a solid sphere about its diameters, $\mathrm{I}=\frac{2}{5} \mathrm{MR}^2$ where $M$ is its mass.
The rotational KE of the sphere,
$
\begin{aligned}
E=\frac{1}{2} I \omega^2 & =\frac{1}{2}\left(\frac{2}{5} M R^2\right) \omega^2 \\
& =\frac{1}{5} M R^2 \omega^2
\end{aligned}
$
If $\Delta \theta$ is the rise in temperature,
$
\begin{aligned}
& \quad M c \Delta \theta=\frac{3}{4} E=\frac{3}{4}\left(\frac{1}{5} M R^2 \omega^2\right) \\
& \therefore \Delta \theta=\frac{3 R^2 \omega^2}{20 c}
\end{aligned}
$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Explore more

More "Answer the following in Detail" from Rotational Dynamics→Rotational Dynamics — all question types→Physics STD 12 Science question papers→Maharashtra Board STD 12 Science question papers→Maharashtra Board question paper generator→

Similar questions

A metallic ring of mass $1\ kg$ has moment of inertia $1\ kg\ m^2$ when rotating about one of its diameters. It is molten and remoulded into a thin uniform disc of the same radius. How much will its moment of inertia be, when rotated about its own axis.

What about the kinetic friction between the road and the lyres?

Two organ pipes open at both ends and of same length but different radii (or diameters) produce sounds of different frequencies. Why?

Write the relation between relative permeability and magnetic susceptibility.

A $100 V$ battery is connected across the combination of capacitors of capacities $4 \mu F$ and $8 \mu F$ in parallel and then in series. Calculate the charge on each capacitor in parallel and in series combination.

A banked circular road is designed for traffic moving at an optimum or most safe speed vo. Obtain an expression for
(a) the minimum safe speed
(b) the maximum safe speed with which a vehicle can negotiate the curve without skidding.

Derive an expression for the maximum safe speed for a vehicle on a circular horizontal road without toppling/overturning/rollover.

Two polarizers are so oriented that the maximum amount of light is transmitted. To what fraction of its maximum value is the intensity of the transmitted light reduced when the second polarizer is rotated through $(a) 300 , (b) 600$ ?

Particle accelerators are important for a variety of research purposes. Large accelerators are used in particle research. There have been several accelerators in India since 1953. The Department of Atomic Energy (DAE), Govt. of India, had taken initiative in setting up accelerators for research. Apart from ion accelerators, the DAE has developed and commissioned a 2 GeV electron accelerator which is a radiation source for research in science. This accelerator, ‘Synchrotron’, is fully functional at Raja Ramanna Centre for Advanced Technology, Indore. An electron accelerator, Microtron with electron energy 8-10 MeV is functioning at Physics Department, Savitribai Phule Pune University, Pune.

Permeability and Permittivity:
Magnetic Permeability is a term analogous to permittivity in electrostatics. It basically tells us about the number of magnetic lines of force that are passing through a given substance when it is kept in an external magnetic field. The number is the indicator of the behaviour of the material in magnetic field. For superconductors χ = – 1. If you substitute in the Eq. (11.18), it is observed that permeability of material µ = 0. This means no magnetic lines will pass through the superconductor.

Magnetic Susceptibility (χ) is the indicator of measure of the response of a given material to the external applied magnetic field. In other words it indicates as to how much magnetization will be produced in a given substance when kept in an external magnetic field. Again it is analogous to electrical susceptibility. This means when the substance is kept in a magnetic field, the atomic dipole moments either align or oppose the external magnetic field. If the atomic dipole moments of the substance are opposing the field, χ is observed to be negative, and if the atomic dipole moments align themselves in the direction of field, χ is observed to be positive. The number of atomic dipole moments of getting aligned in the direction of the applied magnetic field is proportional to χ. It is large for soft iron (χ >1000).