Question
An ammeter whose resistance is 180 Ω gives full scale deflection when current is 2 mA. The shunt required to convert it into an ammeter reading 20 mA (in ohms) is(a) 18(b) 20(c) 0.1(d) 10
✓
Answer
(b) 20
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
An electric field $\overrightarrow{\text{E}}$ and a magnetic field $\overrightarrow{\text{B}}$ exist in a region. The fields are not perpendicular to each other.
→- This is not possible.
- No electromagnetic wave is passing through the region.
- An electromagnetic wave may be passing through the region.
- An electromagnetic wave is certainly passing through the region.
Half life of radioactive element depends upon(a) Amount of element present(b) Temperature(c) Pressure(d) Nature of element
Work of electric motor is(a) To convert ac into dc(b) To convert dc into ac(c) Both (a) and (b)(d) To convert ac into mechanical work
In an intrinsic semiconductor, conductivity is:
Two identical bar magnets are placed on above the other such that they are mutually perpendicular and bisect each other. The time period of this combination in a horizontal magnetic field is $T.$ The time period of each magnet in the same field is
→The relationship between potential difference V, charge Q and capacitance C is:
Two coils have a mutual inductance $0.005 H$. The current changes in the first coil according to equation $I = I _0 \sin$
$\Omega t$, where $I _0=10 A$ and $\omega=100 \pi rad s ^{-1}$. The maximum value of emf in the second coil is
→$\Omega t$, where $I _0=10 A$ and $\omega=100 \pi rad s ^{-1}$. The maximum value of emf in the second coil is
The capacity and the energy stored in a parallel plate condenser with air between its plates are respectively $C_0$ and $W_0.$ If the air is replaced by glass $($dielectric constant $= 5)$ between the plates, the capacity of the plates and the energy stored in it will respectively be
→Best method to increase the sensitivity of the moving coil galvanometer is to decrease:
The switches in figure are closed at $t = 0$ and reopened after a long time at $t = t_0:$
→