Question
An electron microscope is superior to an optical microscope in
✓
Answer
( a)In electron microscope, electron beam$(\lambda \approx 1{Å})$ is used so it’s $R.P.$ is approx. $5000$ times more than that of ordinary microscope $(\lambda \approx 5000{Å})$.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A copper disc of radius $0.1\, m$ rotates about its centre with $10$ revolutions per second in a uniform magnetic field of $0.1$ Tesla. The emf induced across the radius of the disc is
→A camera objective has an aperture diameter $d.$ If the aperture is reduced to diameter $d/2,$ the exposure time under identical conditions of light should be made
→In a conductor $4$ coulombs of charge flows for $2$ seconds. The value of electric current will be
→A glass concave lens is placed in a liquid in which it behaves like a convergent lens. If the refractive indices of glass and liquid with respect to air are $^a{\mu _g}$ and $^a{\mu _l}$ respectively, then
→Pure sodium $(Na)$ is a good conductor of electricity because the $3s$ and $3p$ atomic bands overlap to form a partially filled conduction band. By contrast the ionic sodium chloride $(NaCl)$ crystal is
→The equation of motion of a particle is $\frac{{{d^2}y}}{{d{t^2}}} + Ky = 0$, where $K$ is positive constant. The time period of the motion is given by
→Four particles $A, B, C$ and $D$ with masses $m_A=m, m_B=2m, m_C=3m$ and $m_D=4m$ are at the corners of a square. They have accelerations of equal magnitude with directions as shown. The acceleration of the centre of mass of the particles is
→A string of length $1\, m$ and mass $5\, g$ is fixed at both ends. The tension in the string is $8.0\, N$. The string is set into vibration using an external vibrator of frequency $100\, Hz$. The separation between successive nodes on the string is close to .... $cm$
→Fig. represents vertical sections of four wings moving horizontally in air. In which case the force is upwards
An $AC$ source rated $220\, V , 50\, Hz$ is connected to a resistor. The time taken by the current to change from its maximum to the rms value is
→