Question
An imaginary material reflects red light, scatters green light, transmits blue light, and absorbs yellow, orange, and violet light. A cube of this material is shown in the given diagram.

The surface is illuminated with a beam of white light. What colour will this cube appear?
(i) from above,
(ii) from below and
(iii) from the sides?

Answer

When viewed from above – Red.
When viewed from below – Blue.
When viewed from sides – Green.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A. bulb is rated at 100W, 250V and another one at 60W, 250V. What is the current flowing in the circuit if the two bulbs are put in series across a 220 V mains supply?
Differentiate between the potential energy (U) and the kinetic energy (K).
The primary windings of a step-up transformer are usually made of thicker wire than the secondary. Explain.
Give a reason, why the violet colour of white light deviated most and red colour of white light deviated least.
State two applications each of a convex lens and concave lens.
Two resistances $R_1 = 4Ω$ and $R_2 = 6Ω$ are connected in series. The combination is connected with a battery of e.m.f. $6V$ and negligible resistance. Calculate:
(i) the heat produced per minute in each resistor,
(ii) the power supplied by the battery.
An observer stands at a distance of 850 m from a cliff and fires a gun. After what time gap will he hear the echo? If sound travels at a speed of 350 m/sec., in air.
A bucket contains $8$ kg of water at $25^{\circ} C .2 kg$ of water at $80^{\circ} C$ is poured into it. Neglecting the heat energy absorbed by the bucket, calculate the final temperature of water.
Write the approximate values of speed of light in (i) air and (ii) glass. Use these values to calculate the refractive index of glass with respect to air.
A coil ABCD mounted on an axle is placed between the poles N and S of a permanent magnet as shown in Fig. 10.28



(a) In which direction will the coil begin to rotate when current is passed through the coil in direction ABCD by connecting a battery at the ends A and D of the coil?
(b) Why is a commutator necessary for continuous rotation of the coil?
(c) Complete the diagram with commutator, ets. For the flow of current in the coil?