Question
Column - AColumn - B
1. The value of 1 amu is(A) Radioactive dating
2. Which is most accurate watch?(B) $10^{-9}$
3. Which is the method of determining the age of rocks?(C) $1.66 \times 10^{-2} / kg$
4. How many nanoseconds are there in 1 second?(D) $M ^1 L^2 T^{-2}$
5. Dimension of angular momentum(E) Cesium

Answer

1 (c), 2 (e), 3 (a), 4 (b), 5 (d)

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

AB
1. When both waves are superimposed in the opposite phase at any place then the value of resultant amplitude and intensity(A) Minimum
2. In interference there is a phase difference at some point of the medium(B) Fix
3. In beats there is a phase difference between the waves at any point in the medium(C) 1:3:5
4. The frequency of vibrations produced in a close organ pipe are in the ratio(D) 1:2:3
5. Generated in open organ pipe there is a ratio of frequency of vibrations(E) Changes
AB
1. When both waves are superimposed in the opposite phase at any place then the value of resultant amplitude and intensity(a) Fix
2. In interference there is a phase difference at some point of the medium(b) $1:3:5$
3. In beats there is a phase difference between the waves at any point in the medium(c) $1:2:3$
4. The frequency of vibrations produced in a close organ pipe are in the ratio(d) Changes
5. Generated in open organ pipe there is a ratio of frequency of vibrations(e) Minimum
Q
AB
1. An example of non periodic motion is :(A). Different equation of linear simple harmonic motion
2. An example of harmonic motion is :(B)  Movement of electrons in the orbital of atom
3. There is relation between frequency and period.(C) $\frac{2 \pi}{\omega}$
4. $\frac{d^2 y}{d t^2}+\omega^2 y=0$(D) nT = 1
5. Time period T =(E) Throwing the ball
AB
1. The value of coefficient of linear expansion $\alpha$ is equal to(A) Nature of matter
2. The value of coefficient of areal expansion $\beta$ is equal(B) Less
3. How many times is the coefficient of volume expansion of a substance its coefficient of linear expansion?(C) $\frac{\Delta L }{ L \times \Delta T }$
4. What does specific heat capacity depend on?(D) $\beta=\frac{\Delta A}{A \times \Delta T}$
5. The greater the mass of the radiating body, the greater the rate of cooling.(E) $\gamma=3 a$
Column AColumn B
1.Why do we have to do work when we stretch a string?A. $\frac{ Y _2}{ Y _1}$
2.Elasticity coefficientB. Work has to be on done against inter- atomic forces.
3. $\frac{l_1}{l_2}$C. Equal
4. Bulk moduls of elasticity (H) Equal (K) $=$D. $\frac{\text { Change in pressure }}{\text { Volume strain }}$
5. The stress produced when equal weight is applied wires of equal cross-section.E. $\frac{\text { Stress }}{\text { Strain }}$
AB
1. A thermos bottle filled with tea is shaken vigorously in the internal energy of the system(A) dQ = 0
2. In adiabatic compression of the body increases(B) will increase
3. For isothermal operation of the engine(C) heat
4. Work done in isothermal process(D) $T _1= T _2$
5. In adiabatic change of gas specific heat value happens zero because(E)$\begin{array}{l} 2.303 P _1 V_1  \log 10 \frac{V_2}{V_1}\end{array}$
Column - AColumn - B
1. The wheels of moving vehicles are made hollow in the middle and thick on the periphery because:(A) $g \sin \theta$
2. When an object slides on a plane inclined at an angle of 0 to the horizontal, its accele- ration will be:(B) An object with low moment of inertia
3. What is the moment of inertia of a body relative to the axis passing through its center of mass?(C) Mass remains the same but inertia increases.
4. If two objects with unequal moment of inertia have the same angular momentum. then which object will have greater rotational kinetic energy?(D) on mass
5. Inertia only depends(E) Minimum
Column - AColumn - B
1. The value of centripetal acceleration (A) $|\overrightarrow{ A }|=$
2. $\overrightarrow{A}=A_x \hat{i}+A_y \hat{j}+A_z \hat{k}$
the magnitude of $|\overrightarrow{ A }|$ will be :
(B) $H _{\max }=\frac{1}{4} R _{\max }$
3. Instantaneous acceleration
$\vec{a}=$
(C) Tangential
4. What is the relationship between maximum height and maximum range.(D) $\frac{d v}{d t}$
5. The velocity vector is always in the path of motion(E) $\frac{ V ^2}{ R }$
Column - AColumn – B
1. $\hat{i} \cdot \hat{j}=\hat{j} \cdot \hat{k}=\hat{k} \cdot \hat{i}=$(A) 1
2. $|\hat{i}|=|\hat{j}|=|\hat{k}|$(B) Proportional
3. $(3 \hat{i}+4 \hat{j}-5 \hat{k})$. $(5 \hat{i}+4 \hat{j}+3 \hat{k})=$(C) 0(ZERO)
4. Work done by the force acting perpendicular to the displacement is always(D) 16
5. Work done (w) and heat generated (H) on a system are mutual(E) Zero
AB
1. Dalton's Partial Pressure law(A) $\frac{2}{3}$
2. PV =(B) Excessive
3. The part of mean K.E of unit volume gas isequal to(C) $\begin{array}{l} P = P _1+ P _2+  P _3+\ldots\end{array}$
4. The value of KE. due to r.m.s. velocity is zero(D) $\frac{1}{3} MC _{r m s}^2$
5. The gas that's density ( $\rho$ ) become less than value of $C _{ rms }$(E) zero