MCQ
$Cu^+$ ion is not stable in aqueous solution, due to
  • A
    $d^{10}$ configuration
  • disproportionation
  • C
    less charge
  • D
    pseudo inert gas configuration

Answer

Correct option: B.
disproportionation
b
$Cu^+ \to Cu^{+2} + Cu$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

(image) $\xrightarrow[\begin{subarray}{l} 
  traces\,of \\ 
  KOH 
\end{subarray} ]{{HCN}}A\xrightarrow{{LiAl{H_4}}}B\xrightarrow[{HCl}]{{NaN{O_2}}}C$

$C$ is

The correct order of nucleophilicity is ..... .
Chloroform, when kept open, is oxidised to
Which one of the following bases is not present in $DNA$ ?
The first ionization potential of $Na, Mg, Al$ and $Si$ are in the order
Diethyl ether and air gives ether hydroperoxide. The mechanism of the reaction is
The formation of the oxide ion $O_{(g)}^{2 - }$ requires first an exothermic and then an endothermic step as shown below This is because

${{O}_{(g)}}+{{e}^{-}}=O_{(g)}^{-}\Delta {{H}^{o}}=-142\ kJ\,mo{{l}^{-1}}$

$O_{(g)}^{-}+{{e}^{-}}=O_{(g)}^{2-}\Delta {{H}^{o}}=844\ kJ\,mo{{l}^{-1}}$

$\left[ {Pt{{\left( {N{H_3}} \right)}_4}C{l_2}} \right]B{r_2}$ and $\left[ {Pt{{(N{H_3})}_4}B{r_2}} \right]C{l_2}$ are related to each other as
Temperature dependent equation can be written as
The concentration of potassium ions inside a biological cell is at least twenty times higher than the outside. The resulting potential difference across the cell is important in several processes such as transmission of nerve impulses and maintaining the ion balance. A simple model for such a concentration cell involving a metal $\mathrm{M}$ is:

$\mathrm{M}(\mathrm{s}) \mid \mathrm{M}^{+}$(aq; $0.05$ molar) || $\mathrm{M}^{+}(\mathrm{aq}), 1$ molar) $\mid \mathrm{M}(\mathrm{s})$

For the above electrolytic cell the magnitude of the cell potential $\left|E_{\text {cell }}\right|=70 \mathrm{mV}$.

$1.$ For the above cell

$(A)$ $\mathrm{E}_{\text {cell }}<0 ; \Delta \mathrm{G}>0$ $(B)$ $\mathrm{E}_{\text {cell }}>0 ; \Delta \mathrm{G}<0$

$(C)$ $\mathrm{E}_{\text {cell }}<0 ; \Delta \mathrm{G}^{\circ}>0$ $(D)$ $\mathrm{E}_{\text {cell }}>0 ; \Delta \mathrm{G}^{\circ}>0$

$2.$ If the $0.05$ molar solution of $\mathrm{M}^{+}$is replaced by $0.0025$ molar $\mathrm{M}^{+}$solution, then the magnitude of the cell potential would be

$(A)$ $35 \mathrm{mV}$ $(B)$ $70 \mathrm{mV}$ $(C)$ $140 \mathrm{mV}$ $(D)$ $700 \mathrm{mV}$

Give the answer question $1,2.$