MCQ
Dimensions of coefficient of viscosity are
- A$M L^2 T^{-2}$
- B$M L^2 T^{-1}$
- ✓$M L^{-1} T^{-1}$
- D$M L T$
✓
Answer
Correct option: C.
$M L^{-1} T^{-1}$
(c) $F=-\eta \cdot A \frac{d v}{d x} \Rightarrow[\eta]=\left[M L^{-1} T^{-1}\right]$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A hot metallic sphere of radius $r$ radiates heat. It's rate of cooling is
→Gravels are dropped on a conveyor belt at the rate of $0.5 kg / sec$. The extra force required in newtons to keep the belt moving at $2 m / sec$ is
→An antenna behaves as resonant circuit only when its length is
An electric lamp is fixed at the ceiling of a circular tunnel as shown is figure. What is the ratio the intensities of light at base $A$ and a point $B$ on the wall
→In Bohr model of hydrogen atom, the ratio of periods of revolution of an electron in $n=2$ and $n=1$ orbits is
→The pressure and density of a diatomic gas $(\gamma=7 / 5)$ change adiabatically from $(P, d)$ to $(P, d)$. If $\frac{d^{\prime}}{d}=32$, then $\frac{P^{\prime}}{P}$ should be
→The maximum kinetic energy of photoelectrons emitted from a surface when photons of energy $6 \mathrm{eV}$ fall on it is $4 \mathrm{eV}$. The stopping potential in volts is
→Three solids of masses $m_1, m_2$ and $m_3$ are connected with weightless string in succession and are placed on a frictionless table. If the mass $m_3$ is dragged with a force $T$, the tension in the string between $m_2$ and $m_3$ is
→A battery has e.m.f. $4 V$ and internal resistance $r$. When this battery is connected to an external resistance of $2 \mathrm{ohms}$, a current of 1 amp. flows in the circuit. How much current will flow if the terminals of the battery are connected directly
→The slit of a collimator is illuminated by a source as shown in the adjoining figures. The distance between the slit $S$ and the collimating lens $L$ is equal to the focal length of the lens. The correct direction of the emergent beam will be as shown in figure
→