MCQ
Dimensions of stress are
- ✓$\left[ M L ^{-1} T ^{-2}\right]$
- B$\left[ M L T ^{-2}\right]$
- C$\left[ M L ^{2} T ^{-2}\right]$
- D$\left[ M L ^{0} T ^{-2}\right]$
✓
Answer
Correct option: A.
$\left[ M L ^{-1} T ^{-2}\right]$
a
stress $=\frac{\text { Force }}{\text { Area }}$
stress $=\frac{\text { Force }}{\text { Area }}$
$=\frac{M^{1} L^{1} T^{-2}}{L^{2}}$
stress $= M ^{1} L ^{-1} T ^{-2}$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A moving coil galvanometer allows a full scale current of $10^{-4}\, A$. A series resistance of $2\, M\,\Omega $ is required to convert the above galvanometer into a voltmeter of range $0 -5\, V$. Therefore the value of shunt resistance required to convert the above galvanometer into a ammeter of range $0-10\, mA$ is....$\Omega $
→When a parallel plates capacitor is connected to a source of constant potential difference,
The equivalent capacitance of the combination shown in the figure is :
Which of the following statements is true for an $N$ -type semiconductor
→A machine which is $75$ percent efficient, uses $12 $ joules of energy in lifting up a $1\, kg$ mass through a certain distance. The mass is then allowed to fall through that distance. The velocity at the end of its fall is (in $m{s^{ - 1}})$
→The temperature $\theta$ at the junction of two insulating sheets, having thermal resistances $R _{1}$ and $R _{2}$ as well as top and bottom temperatures $\theta_{1}$ and $\theta_{2}$ (as shown in figure) is given by
→In the following circuits $PN-$ junction diodes $D_1, D_2$ and $D_3$ are ideal for the following potential of $A$ and $B,$ the correct increasing order of resistance between $A$ and $B$ will be
→$(i) -10\ V, -5\ V$
$(ii) -5\ V, -10\ V$
$(iii)-4\ V, -12\ V$
A $0.4\,kg$ mass takes $8 s$ to reach ground when dropped from a certain height ' $P$ ' above surface of earth. The loss of potential energy in the last second of fall is $..............J$. [Take $g =10\,m / s ^2$ ]
→The mass per unit length of a uniform wire is $0.135\, g / cm$. A transverse wave of the form $y =-0.21 \sin ( x +30 t )$ is produced in it, where $x$ is in meter and $t$ is in second. Then, the expected value of tension in the wire is $x \times 10^{-2} N$. Value of $x$ is . (Round-off to the nearest integer)
→An increases in pressure required to decreases the $200$ litres volume of a liquid by $0.004\%$ in container is .......... $kPa$ (Bulk modulus of the liquid $= 2100\, MPa$)
→