Question
Elemental semiconductor and compound semiconductors. Explain with examples.

Answer

Following are the examples of elemental semiconductor and compound semiconductor :
(i) Elemental semiconductors : Si and Ge
(ii) Compound semiconductors :
• Inorganic : CdS, GaAs, CdSe, InP etc.
• Organic anthracenes, doped phthalocyanates etc.
• Organic polymers : polypyrrole, polyaniline, polythiophene etc.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A gas is enclosed in a cylindrical vessel fitted with a frictionless piston. The gas is slowly heated for some time. During the process, 10J of heat is supplied and the piston is found to move out 10cm. Find the increase in the internal energy of the gas. The area of cross section of the cylinder = 4cm2 and the atmospheric pressure = 100kPa.
Two electric trains run at the same speed of 72km/h along the same track and in the same direction with a separation of 2.4km between them. The two trains simultaneously sound brief whistles. A person is situated at a perpendicular distance of 500m from the track and is equidistant from the two trains at the instant of the whistling. If both the whistles were at 500Hz and the speed of sound in air is 340m/s, find the frequencies heard by the person.
Find the binding energy of a hydrogen atom in the state n = 2.
How does the power of a convex lens vary, if the incident red light is replaced by violet light?
The voice of a person, who has inhaled helium, has a remarkably high pitch. Explain on the basis of resonant vibration of vocal cord filled with air and with helium.
The electric field E due to any point charge near it is defined as $\text{E}=\lim\limits_{\text{q}\rightarrow0}\frac{\text{F}}{\text{q}}$ where q is the test charge and F is the force acting on it. What is the physical significance of $\lim\limits_{\text{q}\rightarrow0}$ in this expression?
Draw the electric lines of point charge Q when,
  1. Q > 0
  2. Q < 0.

Draw a plot of the binding energy per nucleon as a function of mass number for a large number of nuclei, 2⩽ A⩽240. How do you explain the constancy of binding energy per nucleon in the range 30 < A < 170 using the property that nuclear force is short - ranged?
What is the work function of metal? It depends on which factors?
A circular loop of one turn carries a current of 5.00A. If the magnetic field B at the centre is 0.200mT find the radius of the loop.
A power transmission line feeds input power at 2300V to a stepdown transformer with its primary windings having 4000 turns. What should be the number of turns in the secondary in order to get output power at 230 V?