MCQ
Equivalent resistance between $A$ and $B$ will be ............ $ohm$
- A$2$
- B$18$
- C$6$
- ✓$3.6$
✓
Answer
Correct option: D.
$3.6$
d
The circuit reduces to
The circuit reduces to
${R_{AB}} = \frac{{9 \times 6}}{{9 + 6}} = \frac{{9 \times 6}}{{15}} = \frac{{18}}{5} = 3.6\, \Omega $
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A $90\, cm$ long solenoid has six layers of windings of $450\, turns$ each. If the diameter of solenoid is $2.2\, cm$ and current carried is $6\, A$, then the magnitude of magnetic field inside the solenoid, near its centre is
→The equation of projectile is $y = 16x\, - \,\frac{{5{x^2}}}{4}$, The horizontal range is .......... $m$
→A cylinder made of perfectly non conducting material closed at both ends is divided into two equal parts by a heat proof piston. Both parts of the cylinder contain the same masses of a gas at a temperature $t_0 = 27^o$ and pressure $P_0 = 1$ atm. Now if the gas in one of the parts is slowly heated to $t = 57^oC$ while the temperature of first part is maintained at $t_0$ the distance moved by the piston from the middle of the cylinder will be.... $cm$ (length of the cylinder $= 84\,\, cm$)
→The output of the given circuit diagram is
A pendulum of length $2 \; m$ consists of a wooden bob of mass $50 \; g$. A bullet of mass $75 \; g$ is fired towards the stationary bob with a speed $v$. The bullet emerges out of the bob with a speed $\frac{v}{3}$ and the bob just completes the vertical circle. The value of $v$ is $\dots \; ms ^{-1}$. (if $g =10 \; m / s ^{2}$ )
→$N$ divisions on the main scale of a vernier calliper coincide with $(N + 1 )$ divisions of the vernier scale. If each division of main scale is $a$ units , then the least count of the instrument is
→$300 \,cal$. of heat is given to a heat engine and it rejects $225 \,cal$. of heat. If source temperature is $227^{\circ} C$, then the temperature of sink will be____${ }^{\circ} C$.
→A highly viscous liquid of viscosity coefficient $\eta$ flows through a fixed horiwntal cylindrical tube (fixed from outer surface) of internal radius $r$, thickness $t (t << r)$ and length $l$. Volume of liquid flowing per;second is $Q$ and pressure difference across the tube is $P$. Modulus of rigidity of material of tube is $\beta$. Shear strain in the tube will be
→A circular disc of radius $b$ has a hole of radius $a$ at its centre (see figure). If the mass per unit area of the disc varies as $\left( {\frac{{{\sigma _0}}}{r}} \right)$, then the radius of gyration of the disc about its axis passing through the centre is
→The diagram shows three infinitely long uniform line charges placed on the $X, Y $ and $Z$ axis. The work done in moving a unit positive charge from $(1, 1, 1) $ to $(0, 1, 1) $ is equal to
→