Question
Explain the reflection of transverse and longitudinal waves from a denser medium and a rarer medium.

Answer

Get the step-by-step solution for this question inside the Vidyadip app.

Get the answer in the app

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Ten litres of water are boiled at $100^{\circ} C$, at a pressure of $1.013 \times 10^5 Pa$, and converted into steam. The specific latent heat of vaporization of water is $539 cal / g$. Find
(a) the heat supplied to the system
(b) the work done by the system
(c) the change in the internal energy of the system. $1 cm ^3$ of water on conversion into steam, occupies $1671 cm ^3( J =4.186 J / cal )$
A wheel of moment of inertia $1 \mathrm{~kg} \cdot \mathrm{m}^2$ is rotating at a speed of $40 \mathrm{rad} / \mathrm{s}$. Due to the friction on the axis, the wheel comes to rest in 10 minutes. Calculate the angular momentum of the wheel, two minutes before it comes to rest.
What does the hysteresis loop represents?
Define the following terms:
1. Electrical circuit
2. Junction
3. Loop
4. Branch
5. Electrical network.
The amplitude and periodic time of $SHM$ are $5$ cm and $6$ s, respectively. What is the phase at a distance of $2.5$ cm from the mean position?
The displacement of a particle performing linear SHM is given by $x=6 \sin \left(3 \pi t+\frac{5 \pi}{6}\right)$ metre.
Find
the amplitude, frequency and the phase constant of the motion.
A resistance of $3 \Omega$ is connected to the secondary coil of $60$ turns of an ideal transformer. Calculate the current $($peak value$)$ in the resistor if the primary has $1200$ turns and is connected to $240 V \ ($peak$)$ ac supply. Assume that all the magnetic flux in the primary coil passes through the secondary coil and that there are no other losses.
Explain the use of potentiometer to determine internal resistance of a cell.
Define linear simple harmonic motion.
A moving-coil galvanometer of resistance 200 ohms gives a full scale deflection of 100 divisions for a current of 50 milliamperes. How will you convert it into an ammeter to read 2 amperes for 20 divisions?