MCQ
For adiabatic process, wrong statement is
- A$dQ = 0$
- B$dU = - dW$
- C$Q =$ constant
- ✓Entropy is not constant
✓
Answer
Correct option: D.
Entropy is not constant
d
(d) For adiabatic process no heat is transferred hence $\mathrm{d} \mathrm{Q}=0$
(d) For adiabatic process no heat is transferred hence $\mathrm{d} \mathrm{Q}=0$
$\mathrm{du}=-\mathrm{d} \mathrm{w}$
As $\quad \mathrm{dQ}=0$ means $\mathrm{Q}$ is constant
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
An $ac$ voltage is applied to a resistance $R$ and an inductor $L$ in series. If $R$ and the inductive reactance are both equal to $3\,\,\Omega$ , the phase difference between the applied voltage and the cureent in the circuit is
→A piece of ice (heat capacity $=2100 \mathrm{~J} \mathrm{~kg}^{-1}{ }^{\circ} \mathrm{C}^{-1}$ and latent heat $=3.36 \times 10^5 \mathrm{~J} \mathrm{~kg}^{-1}$ ) of mass $\mathrm{m}$ grams is at $-5^{\circ} \mathrm{C}$ at atmospheric pressure. It is given $420 \mathrm{~J}$ of heat so that the ice starts melting. Finally when the ice-water mixture is in equilibrium, it is found that $1 \ \mathrm{gm}$ of ice has melted. Assuming there is no other heat exchange in the process, the value of $m$ is
→A current of $2\, A$ flows in a system of conductors as shown. The potential difference $(V_A -V_B)$ will be ................ $\mathrm{V}$
→Quantity $Z$ varies with $x$ and $y$ , according to given equation $Z = x^2y - xy^2$ , where $x = 3.0 \pm 0.1$ and $y = 2.0 \pm 0.1$ . The value of $Z$ is
→A transformer consisting of $300$ turns in the primary and $150$ turns in the secondary gives output power of $2.2\, kW$. If the current in the secondary coils is $10\, A$, then the input voltage and current in the primary coil are
→A uniform wire of resistance $20\,ohm$ having resistance $1\Omega /m$ is bent in the adjoining form of a circle as shown in the figure. If the equivalent resistance between $M$ and $N$ is $1.8 \,\Omega $, then the length of the shorter section is ................ $m$
→In the circuit shown in figure, four capacitors are connected to a battery. The potential difference across the $6$ $\mu F$ capacitor is......$V$
→A block of mass $m_1=1 \ kg$ another mass $m_2=2 \ kg$, are placed together (see figure) on an inclined plane with angle of inclination $\theta$. Various values of $\theta$ are given in List $I$. The coefficient of friction between the block $m _1$ and the plane is always zero. The coefficient of static and dynamic friction between the block $m _2$ and the plane are equal to $\mu=0.3$. In List $II$ expression for the friction on block $m _2$ given. Match the correct expression of the friction in List $II$ with the angles given in List $I$, and choose the correct option. The acceleration due to gravity is denoted by $g$.
→[Useful information : $\tan \left(5.5^{\circ}\right) \approx 0.1 ; \tan \left(11.5^{\circ}\right) \approx 0.2 ; \tan \left(16.5^{\circ} \approx 0.3\right)$ ]
| List $I$ | List $II$ |
| $P.\quad$ $\theta=5^{\circ}$ | $1.\quad$ $m _2 g \sin \theta$ |
| $Q.\quad$ $\theta=10^{\circ}$ | $2.\quad$ $\left(m_1+m_2\right) g \sin \theta$ |
| $R.\quad$ $\theta=15^{\circ}$ | $3.\quad$ $\mu m _2 g \cos \theta$ |
| $S.\quad$ $\theta=20^{\circ}$ | $4.\quad$ $\mu\left(m_1+m_2\right) g \cos \theta$ |
The same retarding force is applied to stop a train. The train stops after $80 m$. If the speed is doubled, then the distance will be
→A point object is placed at a distance of $20\, cm$ from a thin plano-convex lens of focal length $15\, cm$, if the plane surface is silvered. The image will form at :-
→