How does inserting the control rods in the graphite core affect t… - Vidyadip

Question

How does inserting the control rods in the graphite core affect the fission in the reactor? Explain your answer.

✓

Answer

On inserting the control rods in the graphite core, the rods start absorbing the excess neutrons and maintain the rate of reaction as per requirement. The rods can be raised or lowered in the reactor from outside. The part which is inside the reactor absorbs neutrons.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Explore more

More "Answer the questions.[Phy-3M]" from Sources of Energy→Sources of Energy — all question types→Science STD 10 question papers→CBSE Board STD 10 question papers→CBSE Board question paper generator→

Similar questions

A magnifying lens has a focal length of 100mm. An object whose size is 16mm is placed at some distance from the lens so that an image is formed at a distance of 25cm in front of the lens.

What is the distance between the object and the lens?
Where should the object be placed if the image is to form at infinity?

What is a circuit diagram? Draw the labelled diagram of an electric circuit comprising of a cell, a resistor, an ammeter, a voltmeter and a closed switch (or closed plug key). Which of the two has a large resistance: an ammeter or a voltmeter?

Explain with the help of labelled ray-diagram, the defect of vision called hypermetropia, and how it is corrected by a lens.

You are given one hundred $1 Ω $ resister. What is the smallest and largest resistance you can make in a circuit using these?

What is the difference between regular reflection of light and diffuse reflection of light? What type of reflection of light takes place from:

A cinema screen.
A plane mirror.
A cardboard.
Still water surface of a lake

Calculate the area of cross-section of a wire if its length is 1.0m, its resistance is $23 Ω$ and the resistivity of the material of the wire is $1.84\times10 Ω\ \text{m}.$

A p.d. of 10V is needed to make a current of 0.02A flow through a wire. What p.d. is needed to make a current of 250mA flow through the same wire?

What are the environmental consequences of the increasing demand for energy?

How much energy is consumed when a current of 5 amperes flows through the filament (or element) of a heater having resistance of 100 ohms for two hours? Express it in joules.

The magnification of an image formed by a lens is –1. If the distance between the object and its image is 60cm, what is the distance of the object from the optical centre of the lens? Find the nature and focal length of the lens. If the object is displaced 20cm towards the optical centre of the lens, where would the image be formed and what would be its nature? Draw a ray diagram to justify your answer.