MCQ
Identify the operation performed by the circuit given below
- ✓$AND$
- B$NAND$
- C$OR$
- D$NOT$
✓
Answer
Correct option: A.
$AND$
a
| $A$ | $B$ | $C$ | |
| $0$ | $0$ | $0$ | $0$ |
| $1$ | $0$ | $0$ | $0$ |
| $0$ | $1$ | $0$ | $0$ |
| $0$ | $0$ | $1$ | $0$ |
| $1$ | $1$ | $0$ | $0$ |
| $1$ | $0$ | $1$ | $0$ |
| $0$ | $1$ | $1$ | $0$ |
| $1$ | $1$ | $1$ | $1$ |
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Let p and E denote the linear momentum and energy of a photon. If the wavelength is decreased:
An astronomical telescope has an angular magnification of magnitude $5$ for distant objects. The separation between the objective and the eye piece is $36 cm $ and the final image is formed at infinity. The focal length $f_o$ of the objective and the focal length $f_e$ of the eye piece are
→The radioactive decay of uranium into thorium is expressed by the equation $_{92}^{238}U \to _{90}^{234}Th + X,$ where $'X'$ is
→If in a photoelectric experiment, the wavelength of incident radiation is reduced from 6000 Å to 4000 Å then
In the circuit shown in the figure, the current through
γ-rays radiation can be used to create electron-positron pair. In this process of pair production, γ-rays energy cannot be less than
A parallel plate capacitor with a dielectric slab completely occupying the space between the plates is charged by a battery and then disconnected. The slab is pulled out with a constant speed. Which of the following curves represent qualitatively the variation of the capacitance $C$ of the system with time?
→A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10 divisions per milliampere and voltage sensitivity is 2 divisions per millivolt. In order that each division reads 1 volt, the resistance in ohms needed to be connected in series with the coil will be
A person suffering from myopia cannot see clearly :
The positive terminal of $12V$ battery is connected to the ground. Then the negative terminal will be at:
→