MCQ
If a capacitor is connected to two different $A.C.$ generators, then the value of capacitive reactance is:
  • A
    directly proportional to frequency
  • inversely proportional to frequency
  • C
    independent of frequency
  • D
    inversely proportional to the square of frequency

Answer

Correct option: B.
inversely proportional to frequency

$\text{X}_\text{C}=\frac{1}{\omega\text{c}}$
$\therefore\text{X}_\text{C}\propto\frac{1}{\omega}$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Fusion reactions take lace at high temperature because:
A $p-n$ photodiode is made of a material with a band gap of $2.0\, eV.$ The minimum frequency of the radiation that can be absorbed by the material is nearly 
In a PN-junction diode
The example of non$-$ohmic resistance is:
Radiation $p$ with wavelength $6561\;\mathring A$ falls on a metal surface to produce photoelectrons. The electrons are made to enter a uniform magnetic field of $3 \times 10^{-4}\; T$. If the radius of the largest circular path followed by the electrons is $10 \;\mathrm{mm},$ the work function of the metal is close to ............... $eV$
A 100 ohm galvanometer gives full scale deflection at 10 mA. How much shunt is required to read 100 mA
The binding energies of a deutron and an $\alpha-$particle are $1.125, 7.2\ MeV$ nucleon respectively. Which is more stable of the two?
A potentiometer has uniform potential gradient. The specific resistance of the material of the potentiometer wire is $10^{-7} \, ohm-meter$ and the current passing through it is $0.1\, ampere$; cross-section of the wire is $10^{-6}\, m^2$. The potential gradient along the potentiometer wire is
In the circuit diagram of figure, $E = 5\, volt, r = 1\, \Omega ,$$ R_2 = 4\, \Omega , R_1 = R_3 = 1 \Omega$ and $C = 3\, μF.$ Then the magnitude of the charge on each capacitor plate is......$\mu C$
A bar magnet with a magnetic moment $5.0\,Am ^2$ is placed in parallel position relative to a magnetic field of $0.4\,T$. The amount of required work done in turning the magnet form parallel to antiparallel position relative to the field direction is $.........\,J$