MCQ
In the given figure, what is the angle of prism
- A$A$
- B$B$
- ✓$C$
- D$D$
✓
Answer
Correct option: C.
$C$
c
(c) Angle of prism is the angle between incident and emergent surfaces.
(c) Angle of prism is the angle between incident and emergent surfaces.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Two non-reactive monoatomic ideal gases have their atomic masses in the ratio $2: 3$. The ratio of their partial pressures, when enclosed in a vessel kept at a constant temperature, is $4: 3$. The ratio of their densities is:
→$\overrightarrow A $ and $\overrightarrow B $ are two vectors given by $\overrightarrow A = 2\widehat i + 3\widehat j$ and $\overrightarrow B = \widehat i + \widehat j$. The magnitude of the component (projection) of $\overrightarrow A$ on $\overrightarrow B$ is
→$P-V$ diagram of a diatomic gas is a straight line passing through origin. The molar heat capacity of the gas in the process will be
→$A$ block of mass $M$ is placed on $a$ horizontal surface and it is tied with an inextensible string to $a$ block of mass, as shown in figure. A block of mass $m_0$ is also placed on $M$ In previous problem, the tension in the string will be
→An elevator in a building can carry a maximum of $10$ persons, with the average mass of each person being $68\; kg$. The mass of the elevator itself is $920\; kg$ and it moves with a constant speed $3\; \mathrm{m} / \mathrm{s}$. The frictional force opposing the motion is $6000 \;\mathrm{N}$. If the elevator is moving up with its full capacity, the power delivered by the motor to the elevator $\left(\mathrm{g}=10 \;\mathrm{m} / \mathrm{s}^{2}\right)$ must be at least .............. $\mathrm{W}$
→A solid body of constant heat capacity $1\,J /{ }^{\circ} C$ is being heated by keeping it in contact with reservoirs in two ways :
→$(i)$ Sequentially keeping in contact with $2$ reservoirs such that each reservoir supplies same amount of heat.
$(ii)$ Sequentially keeping in contact with 8 reservoirs such that each reservoir supplies same amount of heat.
In both the cases body is brought from initial temperature $100^{\circ}\,C$ to final temperature $200^{\circ}\,C$. Entropy change of the body in the two cases respectively is :
An inductor of inductance $L$ and resistor of resistance $R$ are joined in series and connected by a source of frequency $\omega $. Power dissipated in the circuit is
→In a transistor circuit the emitter-base circuit of a $n-p-n$ transistor is always
→A diatomic ideal gas is compressed adiabatically to $\frac{1}{32}$ of its initial volume. If the initial temperature of the gas is $T_1$ (in Kelvin) and the final temperature is $a T_1$, the value of $a$ is
→White light is used to illuminate two slits in a $YDSE$. The separation between the slits is $d$ and the screen is at a distance $D (D > > b)$ from the slits. At a point on the screen directly in front of one of the slits, which of the following wavelengths are missing.
→