MCQ
$Kilowatt - hour$ is a unit of
- AElectrical charge
- ✓Energy
- CPower
- DForce
✓
Answer
Correct option: B.
Energy
b
(b)
(b)
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Two particles $\mathrm{X}$ and $\mathrm{Y}$ having equal charges are being accelerated through the same potential difference. Thereafter they enter normally in a region of uniform magnetic field and describes circular paths of radii $R_1$ and $R_2$ respectively. The mass ratio of $\mathrm{X}$ and $\mathrm{Y}$ is :
→An achromatic convergent doublet of two lens in contact has a power of $+ 2\, D$. The convex lens is power $+ 5\, D$. What is the ratio of the dispersive powers of the convergent and divergent lenses?
→ In Young's double slit experiment, if width (aperture) of the slit $S$ is increased keeping other parameters constant, then the interference fringes will
→When $0.93\,watt-hour$ of energy is supplied to a block of ice weighing $10\,g,$ it is found that
→Light of wavelength $589.3\,nm$ is incident normally on the slit of width $0.1\,mm.$ What will be the angular width of the central diffraction maximum at a distance of $1\,m$ from the slit........$^o$
→Arrange the following compounds in increasing order of their reactivity towards $HCN$
→$(I)$ Acetaldehyde
$(II)$ Acetone
$(III)$ Di-tert-butylketone
$(IV)$ Methyl-tert-butyl ketone
As given in the figure, a series circuit connected across a $200 \,V, 60\, Hz$ line consists of a capacitor of capacitive reactance $30 \,\Omega$, a non-inductive resistor of $44\, \Omega$, and a coil of inductive reactance $90\, \Omega$ and resistance $36\, \Omega$. The power dissipated in the coil is.....$W$
→In the following circuit, bulb rated as $1.5\, V$, $0.45\, W$. If bulbs glows with full intensity then what will be the equivalent resistance between $X$ and $Y$ ............. $\Omega$
→Consider two configurations of a system of three particles of masses $m, 2m$ and $3m.$ The work done by external agent in changing the configuration of the system from figure $(i)$ to figure $(ii)$ is
→In order to obtain a time constant of $10$ seconds in an $RC$ circuit containing a resistance of $10^3\,\Omega,$ the capacity of a condenser should be.....$ \mu F$
→