Question
Pick out the material that cannot be used to make permanent magnets.
✓
Answer
- Zinc
Permanent magnets are made up of materials having high retentivity, high coercivity, and high permeability such as steel. Other suitable materials for making permanent magnets are alnico (an alloy of iron, aluminum, nickel, copper, and cobalt), cobalt steel, and ticonal. That leaves zinc as the one that cannot be used to make permanent magnets.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
The colour sequence in a carbon resistor is red, brown, orange and silver. The resistance of the resistor is
In a situation the contact force by a rough horizontal surface on a body placed on it has constant magnitude. If the angle between this force and the vertical is decreased, the frictional force between the surface and the body will:
- Increase.
- Decrease.
- Remain the saint.
- May increase or decrease.
A photon in motion has a mass
Calculate the inductance of a unit length of a double tape line as shown in figure. The tapes are separated by a distance h which is considerably less than their width b.
Optoelectronic devices work on:
An electron is accelerated through a potential difference of $200$ volts. If $e/m$ for the electron be $1.6 \times 10^{11}$ coulomb/kg, the velocity acquired by the electron will be
→The speed at which the current travels, in conductor, is nearly equal to:
A potential difference of $2 V$ is applied between the opposite faces of a $Ge$ crystal plate of area $1\ cm^2$ and thickness $0.5\ mm$ . If the concentration of electrons in $Ge$ is $2 \times 10^{19} / m ^3$ and mobilities of electrons and holes are $0.36 \frac{m^2}{ volt - sec }$ and $0.14 \frac{m^2}{ volt - sec }$ respectively, then the current flowing through the plate will be
→A and B are two radioactive substances whose half lives are 1 and 2 years respectively. Initially 10 gm of A and 1 gm of B is taken. The time (approximate) after which they will have same quantity remaining is (a) 6.62 years(b) 5 years(c) 3.2 years(d) 7 years
Consider the circuit shown in the figure. The current $I_3$ is equal to
→