Download App

Semiconductors and Semiconductor Devices — Physics STD 12 Science — Question

Bihar BoardEnglish MediumSTD 12 SciencePhysicsSemiconductors and Semiconductor Devices3 Marks
Question
Show that $\text{AB} + \overline{\text{AB}}$ is always 1.
✓

Answer

Given,
$\text{X}=\text{AB} + \overline{\text{AB}}$
Let,
$\text{AB}=\text{y}$
$\therefore\text{X}=\text{y} + \overline{\text{y}}$
$\text{For y} = 0,$
$\text{X}=0+1$
$=1$
$\text{For y} = 1,$
$\text{X}=1+0$
$=1$
thus, X = 1 for all values of y = AB.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Explore more

More "3 Marks Question" from Semiconductors and Semiconductor Devices→Semiconductors and Semiconductor Devices — all question types→Physics STD 12 Science question papers→Bihar Board STD 12 Science question papers→Bihar Board question paper generator→

Similar questions

(a) Determine the electrostatic potential energy of a system consisting of two charges $7 \mu C$ and $-2 \mu C$ (and with no external field) placed at ( $-9 cm , 0,0)$ and $(9 cm , 0,0)$ respectively.
(b) How much work is required to separate the two charges infinitely away from each other?
(c) Suppose that the same system of charges is now placed in an external electric field $E=A\left(1 / r^2\right) ; A=9 \times 10^5 NC ^{-1} m ^2$. What would the electrostatic energy of the configuration be?
→
Estimate the proportion of boron impurity whieh will increase the conductivity of a pure silicon sample by a factor of 100. Assume that each boron atom creates a hole and the concentration of holes in pure silicon at the same temperature is 7 × 1015 holes per cubic metre. Density of silicon is 5 × 1021 atoms per cubic metre.
→
The count rate from a radioactive sample falls from 4.0 × 106 per second to 1.0 × 106 per second in 20 hours. What will be the count rate 100 hours after the beginning?
→
A rod of mass m and length L, lying horizontally, is free to rotate about a vertical axis through its centre. A horizontal force of constant magnitude F acts on the rod at a distance of $\frac{\text{L}}{4}$ from the centre. The force is always perpendicular to the rod. Find the angle rotated by the rod during the time (t) after the motion starts.
→
A coil of cross-sectional area A lies in a uniform magnetic field B with its plane perpendicular to the field. In this position the normal to the coil makes an angle of 0° with the field. The coil rotates at a uniform rate to complete one rotation in time T. Find the average induced emf in the coil during the interval when the coil rotates:
i. from $0^{\circ}$ to $90^{\circ}$ position
ii. from $90^{\circ}$ to $180^{\circ}$ position
iii. from $180^{\circ}$ to $270^{\circ}$ and
iv. from $270^{\circ}$ to $360^{\circ}$
→
The following table shows some measurements of the decay rate of a radionuclide sample. Find the disintegration constant.
Time (min) lnR (Bq)
36 5.08
100 3.29
164 1.54
218 0
→
Define critical angle and write the conditions of total internal reflection.
→
What are the utilities of moderator, coolant and controlling rods with reference to nuclear reactor.
→
When a block of mass M is suspended by a long wire of length L, the elastic potential energy stored in the wire is $\frac{1}{2}\times$ stress × strain × volume. Show that it is equal to $\frac{1}{2}\text{Mgl}$ where l is the extension. The loss in gravitational potential energy of the Mass-earth sustem is Mgl. does the remaining $\frac{1}{2}\text{Mgl}$ energy go?
→
How does an unpolarised light get polarised when passed through a polaroid?
Two polaroids are set in crossed positions. A third polaroid is placed between the two making an angle θ with the pass axis of the first polaroid. Write the expression for the intensity of light transmitted from the second polaroid. In what orientations will the transmitted intensity be (i) minimum and (ii) maximum?
→