Question
State any two limitations of a cyclotron.

Answer

Limitations of a cyclotron :
1. It cannot be used to accelerate electrons. Because electrons have a very small mass, they quickly achieve relativistic speeds, i.e., speeds at which their mass increases significantly with increase in speed. Then they cannot remain synchronous with the alternating electric field between the dees.
2. For higher energies, with a given magnetic field strength, the exit radius and thus the dees must be large. It is difficult to produce a uniform magnetic field over a large area.
3. Even protons, deuterons, a-particles, etc, cannot be accelerated to very high energy, say of the order of $500 MeV$, using a cyclotron with a fixed cyclotron frequency.
4. No particle accelerator can accelerate uncharged particles, such as neutrons.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

What is heat? Explain.
What is the excess pressure (in atm) inside a soap bubble with a radius of $1.5 \mathrm{~cm}$ and surface tension of $3 \times 10^{-2} \mathrm{~N} / \mathrm{m}$ ? [1 $\left.\mathrm{atm}=101.3 \mathrm{kPa}\right]$
State any two characteristics of angle of contact.
Describe biprism experiment to calculate the wavelength of a momochromatic light. Draw the necessary ray diagram.
An alpha particle $($carrying a positive charge $q=3.2 \times 10^{-19} C )$ enters a region of uniform magnetic field of induction $\vec{B}=(0.5 \hat{ i }+\hat{ j }-\hat{ k })$ T with a velocity $\vec{v}=(4 \hat{ i }+4 \hat{ j }+\hat{ k }) \times 10^2\ m / s$. What is the force $\vec{F}$ on the alpha particle?
Two wires of the same material and same cross-section are stretched on a sonometer. One wire is loaded with $1\ kg$ and another is loaded with $9\ kg.$ The vibrating length of the first wire is $60\ cm$ and its fundamental frequency of vibration is the same as that of the second wire. Calculate the vibrating length of the other wire.
Using differential equation of linear S.H.M, obtain the expression for
(a) velocity in S.H.M.,
(b) acceleration in S.H.M.
A thin rod of uniform cross section is made up of two sections made of wood and steel. The wooden section has length $50 \mathrm{~cm}$ and mass $0.6 \mathrm{~kg}$. The steel section has length $30 \mathrm{~cm}$ and mass $3 \mathrm{~kg}$. Find the moment of inertia of the rod about a transverse axis passing through the junction of the two sections.
Obtain an expression for the self-inductance of a solenoid.
Define
(1) emissive power or radiant power
(2) coefficient of emission of a body