Question
State the factors affecting a liquid-solid angle of contact.

Answer


Factors affecting a liquid-solid angle of contact:
1. the nature of the liquid and the solid in contact,
2. impurities in the liquid,
3. temperature of the liquid.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

What is the reactance of a pure inductor with inductance $10 H$ if the frequency of the applied alternating emf is $50 Hz$ ?
Diffraction results described above can be produced in the laboratory using an electron diffraction tube as shown in figure. It has a filament which on heating produces electrons. This filament acts as a cathode. Electrons are accelerated to quite high speeds by creating large potential difference between the cathode and a positive electrode. On its way, the beam of electrons comes across a thin sheet of

Image
graphite. The electrons are diffracted by the atomic layers in the graphite and form diffraction rings on the phosphor screen. By changing the voltage between the cathode and anode, the energy, and therefore the speed, of the electrons can be changed. This will change the wavelength of the electrons and a change will be seen in the diffraction pattern. By increasing the voltage, the radius of the diffraction rings will decrease. Try to explain why?

Calculate the rise of water inside a clean glass capillary tube of radius $0.1 \ mm$, when immersed in water of surface tension $7 \times 10^{-2} N/m$. The angle of contact between water and glass is zero, the density of water $= 1000 kg/m^3, g = 9.8 m/s^2.$
State the dimensions and SI unit of angular momentum.
Show that R.M.S. velocity of gas molecules is directly proportional to square root of its absolute temperature.
A motor has a coil resistance of $5 \Omega$. If it draws 8.2 A when running at full speed and connected to a $220 V$ line, how large is the back emf?
Explain the cyclic process.
A tuning fork is in resonance with a closed pipe. But the same tuning fork cannot be in resonance with an open pipe of the same length. Why?
A body weighing $0.5\ kg$ tied to a string is projected with a velocity of $10\ m/s$. The body starts whirling in a vertical circle. If the radius of the circle is $0.8\ m$, find the tension in the string when the body is at the top of the circle.
A coil has $1000$ turns, each of area $0.5 m ^2$. What is the magnetic moment of the coil when it carries a current of $1 mA$ ?