MCQ
The angular spread of central maximum, in the diffraction pattern, does not depend on ______.
- ✓The distance between the slit and sources
- BWidth of slit
- CWavelength of light
- DFrequency of light
✓
Answer
Correct option: A.
The distance between the slit and sources
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A series $LCR$ circuit is subjected to an $AC$ signal of $200 \mathrm{~V}, 50 \mathrm{~Hz}$. If the voltage across the inductor $(\mathrm{L}=10 \mathrm{mH})$ is $31.4 \mathrm{~V}$, then the current in this circuit is $\qquad$
→Two identical point charges are placed at a separation of d. P is a point on the line joining the charges, at a distance x from any one charge. The field at P is E, E is plotted against x for values of x from close to zero to slightly less than d. Which of the following represents the resulting curve
The wavefront of a distant source of unknown shape is approximately:
The magnetic susceptibility is
A beam of plane polarized light falls normally on a polarizer of cross sectional area $3\times 10^{-4}m^2$. Flux of energy of incident ray in $10^{-3} \mathrm{~W}$. The polarizer rotates with an angular frequency of 31.4 rad/sec. The energy of light passing through the polarizer per revolution will be
→An $AC$ source is rated $220V, 50Hz$. The average voltage is calculated in a time interval of $0.01s$, It :
→Which of the following are insulators.
In a large building, there are $15$ bulbs of $40\ W$, $5$ bulbs of $100\ W, 5$ fans of $80\ W$ and $1$ heater of $1\ kW$. The voltage of electric mains is $220\ V$. The minimum capacity of the main fuse of the building will be ................ $A$
→If a white light is used in Young’s double slit experiments then a very large number of coloured fringes can be seen
In the adjoining circuit, the e.m.f. of the cell is 2 volt and the internal resistance is negligible. The resistance of the voltmeter is 80 ohm. The reading of the voltmeter will be
