MCQ
The coefficient of linear expansion depends on
- AThe original length of the rod
- BThe specific heat of the material of rod
- CThe change in temperature of the rod
- ✓The nature of the metal
✓
Answer
Correct option: D.
The nature of the metal
d
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
If the height of a satellite from the earth is negligible in comparison to the radius of the earth $R$, the orbital velocity of the satellite is
→$X-$ ray will travel minimum distance in
→In a transistor $(\beta=50)$, the voltage across $5 \,k \Omega$ load resistance in collector circuit is $5 \,V$. The base current is ......... $mA$
→In an experiment, brass and steel wires of length $1\,m$ each with areas of cross section $1\,mm^2$ are used. The wires are connected in series and one end of the combined wire is connected to a rigid support and other end is subjected to elongation. The stress requires to produced a new elongation of $0.2\,mm$ is [Given, the Young’s Modulus for steel and brass are respectively $120\times 10^9\,N/m^2$ and $60\times 10^9\,N/m^2$ ]
→The figure shows a mass $m$ on a frictionless surface. It is connected to rigid wall by the mean of a massless spring of its constant $k$. Initially, the spring is at its natural position. If a force of constant magnitude starts acting on the block towards right, then the speed of the block when the deformation in spring is $x,$ will be
→A magnetic needle is made to vibrate in uniform field $H$, then its time period is $T$. If it vibrates in the field of intensity $4H, $ its time period will be
→An $AC$ circuit has $R =100 \Omega, C =2\, \mu F$ and $L =80\, mH ,$ connected in series. The quality factor of the circuit is$.......$
→Up to what height we should fill the glass of $21\, cm$ height so that it may appear half filled ?.......$cm$
→One main scale division of a vernier callipers is $a$ $cm$ and $n ^{\text {th }}$ division of the vernier scale coincide with $( n -1)^{\text {th }}$ division of the main scale. The least count of the callipers in $mm$ is
→Two particles move on a circular path (one just inside and the other just outside) with angular velocities $\omega$ and $5\omega$ starting from the same point. Then
→