The dimensional formula ${M^0}{L^2}{T^{ - 2}}$ stands for
Medium
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1Two resistors ${R}_{1}=(4 \pm 0.8) \Omega$ and ${R}_{2}=(4 \pm 0.4)$ $\Omega$ are connected in parallel. The equivalent resistance of their parallel combination will beView Solution
- 2If $L,\,C$ and $R$ represent inductance, capacitance and resistance respectively, then which of the following does not represent dimensions of frequencyView Solution
- 3A public park, in the form of a square, has an area of $(100 \pm 0.2)\; m ^2$. The side of park is ............ $m$View Solution
- 4A student uses a simple pendulum of exactly $1 \mathrm{~m}$ length to determine $\mathrm{g}$, the acceleration due to gravity. He uses a stop watch with the least count of $1 \mathrm{sec}$ for this and records $40$ seconds for $20$ oscillations. For this observation, which of the following statement$(s)$ is (are) true?View Solution
$(A)$ Error $\Delta T$ in measuring $T$, the time period, is $0.05$ seconds
$(B)$ Error $\Delta \mathrm{T}$ in measuring $\mathrm{T}$, the time period, is $1$ second
$(C)$ Percentage error in the determination of $g$ is $5 \%$
$(D)$ Percentage error in the determination of $g$ is $2.5 \%$
- 5View SolutionThe focal power of a lens has the dimensions
- 6The density of a solid ball is to be determined in an experiment. The diameter of the ball is measured with a screw gauge, whose pitch is $0.5 \ mm$ and there are $50$ divisions on the circular scale. The reading on the main scale is $2.5 \ mm$ and that on the circular scale is $20$ divisions. If the measured mass of the ball has a relative error of $2 \%$, the relative percentage error in the density isView Solution
- 7View SolutionA dimensionless quantity
- 8View SolutionElectron volt is a unit of
- 9Using dimensional analysis, the resistivity in terms of fundamental constants $h, m_{e}, c, e, \varepsilon_{0}$ can be expressed asView Solution
- 10In the determination of Young's modulus $\left(Y=\frac{4 MLg }{\pi / d ^2}\right)$ by using Searle's method, a wire of length $L=2 \ m$ and diameter $d =0.5 \ mm$ is used. For a load $M =2.5 \ kg$, an extension $\ell=0.25 \ mm$ in the length of the wire is observed. Quantities $d$ and $\ell$ are measured using a screw gauge and a micrometer, respectively. They have the same pitch of $0.5 \ mm$. The number of divisions on their circular scale is $100$ . The contributions to the maximum probable error of the $Y$ measurementView Solution