The elastic limit for a gas
  • A
    Exists
  • B
    Exists only at absolute zero
  • C
    Exists for a perfect gas
  • D
    Does not exist
Easy
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    Young’s moduli of two wires $A$ and $B$ are in the ratio $7 : 4$. Wire $A$ is $2\, m$ long and has radius $R$. Wire $A$ is $2\, m$ long and has radius $R$. Wire $B$ is $1.5\, m$ long and has radius $2\, mm$. If the two wires stretch by the same length for a given load, then the value of $R$ is close to ......... $mm$
    View Solution
  • 2
    In steel, the Young's modulus and the strain at the breaking point are $2 \times {10^{11}}\,N{m^{ - 2}}$ and $0.15$ respectively. The stress at the breaking point for steel is therefore
    View Solution
  • 3
    The ratio of radii of two wires of same material is $2: 1$. If these wires are stretched by equal force, the ratio of stresses produced in them is .............
    View Solution
  • 4
    An aluminum rod (Young's modulus $ = 7 \times {10^9}\,N/{m^2})$ has a breaking strain of $0.2\%$. The minimum cross-sectional area of the rod in order to support a load of ${10^4}$Newton's is
    View Solution
  • 5
    A cube of metal is subjected to a hydrostatic pressure of $4\;GPa.$ The percentage change in the length of the side of the cube is close to.......$\%$
    (Given bulk modulus of metal, $B =8 \times 10^{10}\, Pa$ )
    View Solution
  • 6
    Calculate the work done, if a wire is loaded by $'Mg'$ weight and the increase in length is $'l'$
    View Solution
  • 7
    In the below graph, point $B$ indicates
    View Solution
  • 8
    A sphere contracts in volume by $0.01 \%$ when taken to the bottom of sea $1 \,km$ deep. Find Bulk modulus of the material of sphere ........... $N / m ^2$
    View Solution
  • 9
    In plotting stress versus strain curves for two materials $P$ and $Q$, a student by mistake puts strain on the $y$-axis and stress on the $x$-axis as shown in the figure. Then the correct statement$(s)$ is(are)

    $(A)$ $P$ has more tensile strength than $Q$

    $(B)$ $P$ is more ductile than $Q$

    $(C)$ $P$ is more brittle than $Q$

    $(D)$ The Young's modulus of $P$ is more than that of $Q$

    View Solution
  • 10
    According to Hook’s law force is proportional to
    View Solution