The electrical resistivities of five substances A, B, C, D and E are given below:
$\begin{matrix}\text{B}&110\times10^{-8}\Omega\text{ m}\\\text{C}&2.60\times10^{-8}\Omega\text{ m}\\\text{D}&10.0\times10^{-8}\Omega\text{ m}\\\text{E}&1.70\times10^{-8}\Omega\text{ m}\end{matrix}$
Download our app for free and get startedPlay store
  1. E is best conductor of electricity due to its least electrical resistivity.
  2. C, because its resistivity is lesser than that of A.
  3. B, because it has the highest electrical resistivity.
  4. C and E, because of their low electrical resistivities.
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a Parallel circuit to an identical power supply line.
    1. Which circuit would have the highest voltage across each bulb?
    2. In which circuit would the bulbs be brighter?
    3. In which circuit, if one bulb blows out, all others will stop glowing
    4. Which circuit would have less current in it?
    View Solution
  • 2
    State and explain Joule’s law of heating.
    View Solution
  • 3
    A piece of wire of resistance $20 Ω$ is drawn out so that its length is increased to twice its original length. Calculate the resistance of the wire in the new situation.
    View Solution
  • 4
    In the circuit shown below, the voltmeter reads $10V.$
    1. What is the combined resistance?
    2. What current flows?
    3. What is the p.d. across $ 2 Ω$ resistor?
    4. What is the p.d. across $3 Ω$ resistor?
    View Solution
  • 5
    The electrical resistivities of four materials P, Q, R and S are given below:
    $\begin{matrix}\text{P}&6.84\times10^{-8}\Omega\text{m}\\\text{Q}&1.70\times10^{-8}\Omega\text{m}\\\text{R}&1.0\times10^{15}\Omega\text{m}\\\text{S}&11.0\times10^{-7}\Omega\text{m}\end{matrix}$
    Which material will you use for making:
    1. Heating element of electric iron.
    2. Connecting wires of electric iron.
    3. Covering of connecting wires?
    Give reason for your choice in each case.
    View Solution
  • 6
    How will you connect three resistors of resistances $2Ω, 3Ω$ and $6Ω $ obtain a total n si stance of:
    1. $4 Ω,$
    2. $1Ω$
    View Solution
  • 7
    A flash of lightning carries $10\ C$ of charge which flows for $0.01\ s$. What is the current? If the voltage is $10MV$, what is the energy?
    View Solution
  • 8
    Three 2V cells are connected in series and used as a battery in a circuit.
    1. What is the p.d. at the terminals of the battery?
    2. How many joules of electrical energy does 1C gain on passing through
    1. One cell.
    2. All three cells?
    View Solution
  • 9
    A resistance of $40$ ohms and one of $60$ ohms are arranged in series across $220$ volt supply. Find the heat in joules produced by this combination of resistances in half a minute.
    View Solution
  • 10
    If the charge on an electron is $1.6 \times 10$ coulombs, how many electrons should pass through a conductor in $1$ second to constitute $1$ ampere current?
    View Solution