Question
The phenomenon of interference is shown by(a) Longitudinal mechanical waves only(b) Transverse mechanical waves only(c) Electromagnetic waves only(d) All the above types of waves
✓
Answer
(d) All the above types of waves
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Joining of light nuclei of elements to form a heavy nucleus with the release of energy is called:
Dielectric constant of pure water is $81$. Its permittivity will be
→For a triode $\mathrm{r}_{\mathrm{p}}=10$ kilo ohm and $\mathrm{g}_{\mathrm{m}}=3$ milli mho. If the load resistance is double of plate resistance, then the value of voltage gain will be
→A glass slab of thickness 3 cm and refractive index 3/2 is placed on ink mark on a piece of paper. For a person looking at the mark at a distance 5.0 cm above it, the distance of the mark will appear to be(a) 3.0 cm(b) 4.0 cm(c) 4.5 cm(d) 5.0 cm
At room temperature, a P-type semiconductor has(a) Large number of holes and few electrons(b) Large number of free electrons and few holes(c) Equal number of free electrons and holes(d) No electrons or holes
The $SI$ unit of inductance, the henry, can be written as
→To convert galvanometer into voltmeter one should connect:
Five resistances are connected as shown in the figure. The effective resistance between the points $A$ and $B$ is
→Core of electromagnets are made of ferromagnetic material which has:
A wire elongates by 1.0mm when a load W is hung from it. If this wire goes over a a pulley and two weights W each are hung at the two ends, he eloogation of he wire will be:
- 0.5m
- 1.0mm
- 2.0mm
- 4.0mm.