MCQ
Total internal reflection of light is possible when light enters from
- AAir to glass
- BVacuum to air
- CAir to water
- ✓Water to air
✓
Answer
Correct option: D.
Water to air
d
(d) For total internal reflection light must travel from denser medium to rarer medium.
(d) For total internal reflection light must travel from denser medium to rarer medium.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Resistances of $6\, ohm$ each are connected in the manner shown in adjoining figure. With the current $0.5\,ampere$ as shown in figure, the potential difference ${V_P} - {V_Q}$ is .............. $V$
→A beam of plane polarised light of large cross sectional area and uniform intensity of $3.3 \,Wm ^{-2}$ falls normally on a polariser (cross sectional area $3 \times 10^{-4}\, m ^{2}$ ) which rotates about its axis with an angular speed of $31.4\, rad/s.$ The energy of light passing through the polariser per revolution, is close to ........ $ \times 10^{-4} \,J$
→A proton moving with a constant velocity passes through a region of space without any change in its velocity. If $\vec{E}$ and $\vec{B}$ represent the electric and magnetic fields respectively, then the region of space may have :
→($A$) $\mathrm{E}=0, \mathrm{~B}=0$
($B$) $\mathrm{E}=0, \mathrm{~B} \neq 0$
($C$) $\mathrm{E} \neq 0, \mathrm{~B}=0$
($D$) $\mathrm{E} \neq 0, \mathrm{~B} \neq 0$
Choose the most appropriate answer from the options given below :
A $750\, Hz,$ $20$ $V$ (rms ) source is connected to a resistance of $100\, \Omega$ an inductance of $0.1803\, H$ and a capacitance of $10\mu ,$ $F$ all in series. The time in which the resistance (heat capacity $2 J /{ }^{\circ} C$ ) will get heated by $10^{\circ} C$. (assume no $105 s$ of heat to the surroundings) is close to$.....s$
→The current $'i'$ in an inductance coil varies with time $'t'$ according to following graph which of the following plots shows the variation of voltage in the coil
→If 2.2 kilowatt power is transmitted through a 10 ohm line at 22000 volt, the power loss in the form of heat will be
A conductor $ABOCD$ moves along its bisector with a velocity of $1\, m/s$ through a perpendicular magnetic field of $1$ $wb/m^2$, as shown in fig. If all the four sides are of $1\,m$ length each, then the induced emf between points $A$ and $D$ is......$volt$
→A particle has a mass $400$ times than that of the electron and charge is double than that of a electron. It is accelerated by $5\,V$ of potential difference. Initially the particle was at rest, then its final kinetic energy will be......$eV$
→In a metallic conductor, under the effect of applied electric field, the free electrons of the conductor
Cut off potentials for a metal in photoelectric effect for light of wavelength $\lambda_1$, $\lambda_2$ and $\lambda_3$ is found to be $V_1$, $V_2$ and $V_3$ volts if $V_1$, $V_2$ and $V_3$ are in Arithmetic Progression and $\lambda_1$, $\lambda_2$ and $\lambda_3$ will be:
→