MCQ
Two spheres of different materials one with double the radius and one-fourth wall thickness of the other, are filled with ice. If the time taken for complete melting ice in the large radius one is $25$ minutes and that for smaller one is $16$ minutes, the ratio of thermal conductivities of the materials of larger sphere to the smaller sphere is
  • A
    $4:5$
  • B
    $5:4$
  • C
    $25:1$
  • $1:25$

Answer

Correct option: D.
$1:25$
d
(d) $Q = \frac{{KA\,(\Delta \theta )t}}{l}$

$Q$ and $\Delta \theta $ are same for both spheres hence

$K \propto \frac{l}{{At}} \propto \frac{l}{{{r^2}t}}$ ==> $\frac{{{K_{{\rm{larger}}}}}}{{{K_{{\rm{smaller}}}}}} = \frac{{{l_l}}}{{{l_s}}} \times {\left( {\frac{{{r_s}}}{{{r_l}}}} \right)^2} \times \frac{{{t_s}}}{{{t_l}}}$. It is given that ${r_l} = 2{r_s},$ ${l_l} = \frac{1}{4}{l_s}$ and ${t_1} = 25$min, ${t_s} = 16$min.

==> $\frac{{{k_{{\rm{larger}}}}}}{{{k_{{\rm{smaller}}}}}} = \left( {\frac{1}{4}} \right){\left( {\frac{1}{2}} \right)^2} \times \frac{{16}}{{25}} = \frac{1}{{25}}$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

On a foggy day, two drivers spot each other when $80\, m$ apart. They were travelling at $70\, km/h$ and $60\, km/h$. Both apply brakes simultaneously which retard the cars at the rate of $5\, ms^{-2}$. Which of the following statements is correct ?
Given below are two statements :
Statement $(I) :$ Dimensions of specific heat is $[L^2T^{-2}K^{-1}]$
Statement $(II) :$ Dimensions of gas constant is $[M L^2T^{-1}K^{-1}]$
A particle is released from height S above the surface of the earth. At certain height its kinetic energy is three times its potential energy. The height from the surface of the earth and the speed of the particle at that instant are respectively.
Figure here shows the vertical cross section of a vessel filled with a liquid of density $\rho$. The normal thrust per unit area on the walls of the vessel at the point $P$, as shown, will be
A liquid $X$ of density $3.36\  g/cm^3$ is poured in a $U-$ tube, which contains $Hg$. Another liquid $Y$ is poured in left arm with height $8\  cm$, upper levels of $X$ and $Y$ are same. What is density of $Y$ .......... $g/cc$
$300$ Joule of work is done in sliding up a $2 \,kg$ block on an inclined plane to a height of $10\, metres$. Taking value of acceleration due to gravity $‘g’ $ to be $10 \,m/s^2$, work done against friction is ........ $J$
A coil having $100$ turns, area of $5 \times 10^{-3} \mathrm{~m}^2$, carrying current of $1 \mathrm{~mA}$ is placed in uniform magnetic field of $0.20 \mathrm{~T}$ such a way that plane of coil is perpendicular to the magnetic field. The work done in turning the coil through $90^{\circ}$ is . . . . . . $\mu \mathrm{J}$.
A body of mass $2\,kg$ is initially at rest. It starts moving unidirectionally under the influence of a source of constant power P. Its displacement in $4\,s$ is $\frac{1}{3} \alpha^2 \sqrt{ P } m$. The value of $\alpha$ will be $.............$
Assertion : An electric motor will have maximum efficiency when back $emf$ becomes equal to half of applied $emf$ .

Reason : Efficiency of electric motor depends only on magnitude of back $emf$ .

A particle is projected from a horizontal plane ($x-z$ plane) such that its velocity vector at time t is given by $\vec V = a\hat i + (b - ct)\hat j$ Its range on the horizontal plane is given by