Question
When a current passes through the junction of two different  metals, evolution or absorption of heat at the junction is known as(a) Joule  effect(b) Seebeck effect(c) Peltier effect(d) Thomson effect
       

Answer

(c) Peltier effect

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

When a capillary tube is dipped into a liquid, the liquid neither rises nor falls in the capillary.
Some magnetic flux is changed from a coil of resistance $10$ ohm. As a result an induced current is developed in it, which varies with time as shown in figure. The magnitude of change in flux through the coil in webers is
A flake of glass (refractive index 1.5) is placed over one of the openings of a double slit apparatus. The interference pattern displaces itself through seven successive maxima towards the side where the flake is placed. if wavelength of the diffracted light is λ = 600nm, then the thickness of the flake is(a) 2100 nm(b) 4200 nm(c) 8400 nm(d) None of these
       
Polarising angle for water is 53°4'. If light is incident at this angle on the surface of water and reflected, the angle of refraction is (a) 53°4'  (b) 126°56'(c) 36°56'(d) 30°4'
       
A potentiometer wire of length $1\ m$ and resistance $10\Omega$ is connected in series with a cell of emf $2V$ with internal resistance $1\Omega$ and a resistance box including a resistance $R.$ If potential difference between the ends of the wire is $1\ mV,$ the value of $R$ is
The frequency of $1^{st}$ line of Balmer series in $H_2$  atom is $V_0$. The frequency of line emitted by singly ionised $He$ atom is
If $n, e, \tau$ and $m$ respectively represent the density, charge relaxation time and mass of the electron, then the resistance of a wire of length $/$ and area of cross$-$section $A$ will be
A step up transformer has transformation ration 5 : 3. What is voltage in secondary if voltage in primary is 60 V(a) 20 V(b) 60 V(c) 100 V(d) 180 V
       
A horizontal circular loop carries a current that looks clockwise when viewed from above. It is replaced by an equivalent magnetic dipole consisting of a south pole S and a north pole N:
  1. The line SN should be along a diameter of the loop.
  2. The line SN should be perpendicular to the plane of the loop.
  3. The south pole should be slow the loop.
  4. The north pole should be below the loop.
Flint glass prism is joined by a crown glass prism to produce dispersion without deviation. The refractive indices of these for mean rays are 1.602 and 1.500 respectively. Angle of prism of flint prism is 10°, then the angle of prism for crown prism will be(a) 12°2.4'(b) 12°4’(c) 1.24°   (d) 12°