Which of the following measurement is more accurate?
Easy
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1In a relation $F = a \,sin\, k_1x + b \,sin\, k_2t$ where $F , x$ and $T$ denote the force,distance and time respectively. Units of $k _{1}$ and $k _{2}$ are respectivelyView Solution
- 2View SolutionWhich of the two have same dimensions
- 3The mean time period of second's pendulum is $2.00s$ and mean absolute error in the time period is $0.05s$. To express maximum estimate of error, the time period should be written asView Solution
- 4In a experiment to measure the height of a bridge by dropping a stone into water underneath, if the error in the measurement of times is $0.1\;s$ at the end of $2\;s$, then the error in the estimation of the height of the bridge will beView Solution
- 5The distance of the Sun from earth is $1.5 \times 10^{11} \,m$ and its angular diameter is $(2000) \,s$ when observed from the earth. The diameter of the Sun will be ...........View Solution
- 6A physical quantity $Q$ is found to depend on quantities $a, b, c$ by the relation $Q=\frac{a^4 b^3}{c^2}$. The percentage error in $a$, $b$ and $c$ are $3 \%, 4 \%$ and $5 \%$ respectively. Then, the percentage error in $\mathrm{Q}$ is :View Solution
- 7Consider two physical quantities A and B related to each other as $E=\frac{B-x^2}{A t}$ where $E, x$ and $t$ have dimensions of energy, length and time respectively. The dimension of $A B$ isView Solution
- 8In an experiment of determine the Young's modulus of wire of a length exactly $1\; m$, the extension in the length of the wire is measured as $0.4\,mm$ with an uncertainty of $\pm 0.02\,mm$ when a load of $1\,kg$ is applied. The diameter of the wire is measured as $0.4\,mm$ with an uncertainty of $\pm 0.01\,mm$. The error in the measurement of Young's modulus $(\Delta Y)$ is found to be $x \times 10^{10}\,Nm ^{-2}$. The value of $x$ isView Solution
$\left[\right.$ Take $\left.g =10\,m / s ^{2}\right]$
- 9$Newton/metr{e^{\rm{2}}}$ is the unit ofView Solution
- 10If dimensions of critical velocity $v_c$ of a liquid flowing through a tube are expressed as$ [\eta ^x \rho ^yr^z]$ where $\eta ,\rho $ and $r $ are the coefficient of viscosity of liquid, density of liquid and radius of the tube respectively, then the values of $x, y$ and $z$ are given byView Solution