Question
Write the underlying principle of a moving coil galvanometer.

Answer

A current carrying coil, in the presence of magnetic field, experiences a torque, which produces proportionate deflection.
Alternate Answer
[(deflection) $\theta \alpha\tau$ (Torque)]

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

For a transistor amplifier, the voltage gain,
  1. Remains constant for all frequencies.
  2. Is high at high and low frequencies and constant in the middle frequency range.
  3. Is low at high and low frequencies and constant at mid frequencies.
  4. None of the above.
Two electrons are kept at a distance of I A from cach other. Calculate the Coulomb force between them.
Explain the uses of Polaroid.
When a current is established in a wire, the free electrons drift in the direction opposite to the current. Does the number of free electrons in the wire continuously decrease?
A steel plate of face area $4 \mathrm{~cm}^2$ and thickness 0.5 cm is fixed rigidly at the lower surface. A tangential force of 10 N is applied on the upper surface. Find the lateral displacement of the upper surface with respect to the lower surface. Rigidity modulus of steel $=8.4 \times 10^{10} \mathrm{~N} / \mathrm{m}^2$.
Is the dispersion power of crown glass more or less than that of flint glass? Write.
What is the importance of Gaussian surface?
A pure inductor of $25.0 mH$ is connected to a source of $220 V$. Find the inductive reactance and rms current in the circuit if the frequency of the source is $50 Hz$.
In a circuit containing a capacitor and an AC source the current is zero at the. stant the source voltage is maximum. Is it consistent with Ohm's law?
Three light sources $A, B$ and $C$ emit equal amount of radiant energy per unit time. The wavelengths emitted by the three sources are $450\ nm, 555\ nm$ and $700\ nm $ respectively. The brightness sensed by an eye for thesources are $X_A, X_B$ and $X_C$ respectively. Then,