- Roemer method.
- Fizeau method.
- Focault method.
- Michelson method.
- Focault method.
Explanation:
Foucault gave the first laboratory method to find the velocity of light. He obtained a value of 2.98 × 108m/s 2.98 × 108m/s from his measurements.
6 questions · self-marked practice — reveal the answer and mark yourself.
Explanation:
Foucault gave the first laboratory method to find the velocity of light. He obtained a value of 2.98 × 108m/s 2.98 × 108m/s from his measurements.
Explanation:
Foucault method can be used to measure the speed of light in water. One of the advantage of this method is that one can put some transparent medium (or water) between two mirrors to measure the speed of light in that medium (or water). Foucault observed that the velocity of light in water is less than that in the air.
Explanation:
If the gas is gradually pumped out, a vacuum will be created inside the closed cylindrical tube, and experimentally, light travels at the fastest speed in vacuum as compared to any other medium.
Explanation:
The speed of light is a fundamental constant, and with respect to any inertial frame, it is independent of the motion of the light source.
Explanation:
Different wavelengths travel at different speeds through different media. In vacuum, the speeds of both the red light and yellow light are same but are different in air due to some optical density of air. Both wavelengths act in a different way in the air.
Explanation:
Light rays emitting from a source have to cover some optical distance to form an image of the source on the other side of the lens. So, when a light source is shifted by some distance on the principal axis, then the light rays emitting from the new position of the source take some time to form a shifted image of the object on the other side of the lens. However, this delay is very small because the speed of light has a very larger value.