Download App

Electric Charges and Fields — Physics STD 12 Science — Question

Gujarat BoardEnglish MediumSTD 12 SciencePhysicsElectric Charges and Fields1 Mark
MCQ
A closed surface S is constructed around a conducting wire connected to a battery and a switch (figure). As the switch is closed, the free electrons in the wire start moving along the wire. In any time interval, the number of electrons entering the closed surface S is equal to the number of electrons leaving it. On closing the switch, the flux of the electric field through the closed surface:

  • A
    Is increased.
  • B
    Is decreased.
  • C
    Remains unchanged.
  • D
    Remains zero.
✓

Answer

  1. Remains unchanged.

Explanation:

The flux of the electric field through the closed surface is remain unchanged.

Because the no. of electric field lines enter in the closed path = no. of electric field lines existsin the closed path.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Explore more

More "M.C.Q (1 Marks)" from Electric Charges and Fields→Electric Charges and Fields — all question types→Physics STD 12 Science question papers→Gujarat Board STD 12 Science question papers→Gujarat Board question paper generator→

Similar questions

An electron is moving in electric field and magnetic field it will gain energy from

(a) Electric field

(b) Magnetic field

(c) Both of these

(d) None of these

→

A galvanometer of 100 Ω resistance gives full scale deflection when 10 mA of current is passed. To convert it into 10 A  range ammeter, the resistance of the shunt required will be

(a) -10 Ω

(b) 1 Ω 

(c) 0.1 Ω

(d) 0.01 Ω
→

The resistance of a galvanometer is 50 ohms and the current required to give full scale deflection is 100μA. In order to convert it into an ammeter, reading upto 10A, it is necessary to put a resistance of

(a) 5  in parallel

(b) 5  in parallel

(c)  in series

(d) 99,950  in series
→

The current passing through a choke coil of 5 henry is decreasing at the rate of 2 ampere/sec. The e.m.f. developing across the coil is

(a) 10 V

(b) – 10 V

(c) 2.5 V  

(d) – 2.5 V
→

The resistivity of a wire depends on its

(a) Length

(b) Area of cross-section

(c) Shape

(d) Material
→

In a Thomson set-up for the determination of e/m, electrons accelerated by 2.5 kV enter the region of crossed electric and magnetic fields of strengths 3.6  and 1.2   respectively and go through undeflected. The measured value of e/m of the electron is equal to

(a) 1.0  

(b) 1.76  

(c) 1.80   

(d) 1.85   
→
An electric field line is a curve drawn in such a way that the tangent dram! any point on the curve gives __________ at that point.
→

A point source of electromagnetic radiation has an average power output of 800 W. The maximum value of electric field at a distance 4.0 m from the source is

(a) 64.7 V/m

(b) 57.8 V/m

(c) 56.72 V/m

(d) 54.77 V/m
→

A cell of internal resistance 3 ohm and emf 10 volt is connected to a uniform wire of length 500 cm and resistance 3 ohm.  The potential gradient in the wire is

(a) 30 mV/cm

(b) 10 mV/cm

(c) 20 mV/cm

(d) 4 mV/cm
→

Effective resistance between A and B is

(a) 15 W  

(b) 5 W

(c)  

(d) 20 W
→