Question
A conducting loop is placed in a uniform magnetic field with its plane perpendicular to the field. An $emf$ is induced in the loop if

$(a)$  It is translated (inside the field)
$(b)$  It is rotated about its axis
$(c)$  It is rotated about a diameter
$(d)$  It is deformed

Answer

The $EMF$ induced in a loop is given as $E M F=-\frac{d \phi}{d t}$

Hence a change in flux through the loop is necessary for emf induction, which

happens only in case of options $C$ and $D.$

Hence correct answers are options $\mathrm{C}$ and $\mathrm{D}$.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A bob is hanging over a pulley inside a car through, a string. The second end of the string is in the hand of a person standing in the car. The car is moving with constant acceleration ' $a$ ' directed horizontally as shown in figure. Other end of the string is pulled with constant acceleration ' $a$ ' vertically. The tension in the string is equal to-
At $NTP$ the mass of one litre of air is $1.293\, gm.$ The value of specific gas constant will be ...... $J/K-gm$
Which of the following equations represents a wave
The storage battery of a car has an $emf$ of $12\; V$. If the internal resistance of the battery is $0.4\; \Omega,$ what is the maximum current (in $A$) that can be drawn from the battery?
When a wave travelling in medium is reflected from the boundary of a denser medium, which of the following will not change?
Find the potential difference $V_a -V_b$ between the points $a$ and $b$ shown in each  part of the figure.
A tank is filled by liquid of density $\rho$ upto height $H$. The average pressure on the walls of container is .....
The angles which a vector $\hat i + \hat j + \sqrt 2 \,\hat k$ makes with $X, Y$ and $Z$ axes respectively are
A small particle of mass $m$ is projected at an angle $\theta $ with the $x-$ axis with an initial velocity $v_0$ in the $x-y$ plane as shown in the figure. At a time $t < \frac{{{v_0}\,\sin \,\theta }}{g}$, the angular momentum of the particle is
Match List $I$ with List $II.$

  List $I$   List $II$
$(a)$ Rectifier $(i)$ Used either for stepping up or stepping down the $a.c.$ voltage
$(b)$ Stabilizer $(ii)$ Used to convert $a.c.$ voltage into $d.c.$ voltage
$(c)$ Transformer $(iii)$ Used to remove any ripple in the rectified output voltage
$(d)$ Filter $(iv)$ Used for constant output voltage even when the input voltage or load current change

Choose the correct answer from the options given below: