A highly rigid cubical block $A$ of small mass $M$ and side $L$ is fixed rigidly onto another cubical block $B$ of the same dimensions and of low modulus of rigidity $\eta $ such that the lower face of $A$ completely covers the upper face of $B$. The lower face of $B$is rigidly held on a horizontal surface. A small force $F$ is applied perpendicular to one of the side faces of $A$. After the force is withdrawn block $A$ executes small oscillations. The time period of which is given by
  • A$2\pi \sqrt {\frac{{M\eta }}{L}} $
  • B$2\pi \sqrt {\frac{L}{{M\eta }}} $
  • C$2\pi \sqrt {\frac{{ML}}{\eta }} $
  • D$2\pi \sqrt {\frac{M}{{\eta L}}} $
IIT 1992, Diffcult
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    If the measurement errors in all the independent quantities are known, then it is possible to determine the error in any dependent quantity. This is done by the use of series expansion and truncating the expansion at the first power of the error. For example, consider the relation $z=x / y$. If the errors in $x, y$ and $z$ are $\Delta x, \Delta y$ and $\Delta z$, respectively, then

    $z \pm \Delta z=\frac{x \pm \Delta x}{y \pm \Delta y}=\frac{x}{y}\left(1 \pm \frac{\Delta x}{x}\right)\left(1 \pm \frac{\Delta y}{y}\right)^{-1} .$

    The series expansion for $\left(1 \pm \frac{\Delta y}{y}\right)^{-1}$, to first power in $\Delta y / y$, is $1 \mp(\Delta y / y)$. The relative errors in independent variables are always added. So the error in $z$ will be $\Delta z=z\left(\frac{\Delta x}{x}+\frac{\Delta y}{y}\right)$.

    The above derivation makes the assumption that $\Delta x / x \ll<1, \Delta y / y \ll<1$. Therefore, the higher powers of these quantities are neglected.

    ($1$) Consider the ratio $r =\frac{(1- a )}{(1+ a )}$ to be determined by measuring a dimensionless quantity a.

    If the error in the measurement of $a$ is $\Delta a (\Delta a / a \ll<1)$, then what is the error $\Delta r$ in

    $(A)$ $\frac{\Delta a }{(1+ a )^2}$  $(B)$ $\frac{2 \Delta a }{(1+ a )^2}$  $(C)$ $\frac{2 \Delta a}{\left(1-a^2\right)}$  $(D)$ $\frac{2 a \Delta a}{\left(1-a^2\right)}$

    ($2$) In an experiment the initial number of radioactive nuclei is $3000$ . It is found that $1000 \pm$ 40 nuclei decayed in the first $1.0 s$. For $|x|<1$, In $(1+x)=x$ up to first power in $x$. The error $\Delta \lambda$, in the determination of the decay constant $\lambda$, in $s ^{-1}$, is

    $(A) 0.04$  $(B) 0.03$  $(C) 0.02$  $(D) 0.01$

    Give the answer or quetion ($1$) and ($2$)

    View Solution
  • 2
    The addition of three masses $1.6 \,g , 7.32 \,g$ and $4.238 \,g$, addressed upto proper decimal places is ....... $g$
    View Solution
  • 3
    Which of the following is the unit of specific heat
    View Solution
  • 4
    The quantities $A$ and $B$ are related by the relation, $m = A/B$, where $m$ is the linear density and $A$ is the force. The dimensions of $B$ are of
    View Solution
  • 5
    $Assertion$: In the measurement of physical quantities direct and indirect methods are used.

    $Reason$ : The accuracy and precision of measuring instruments along with errors in measurements should be taken into account, while expressing the result.

    View Solution
  • 6
    The unit of absolute permittivity is
    View Solution
  • 7
    If $L$ and $R$ are respectively the inductance and resistance, then the dimensions of $\frac{R}{L}$ will be
    View Solution
  • 8
    Which of the following practical units of length is not correct?
    View Solution
  • 9
    The workdone by a gas molecule in an isolated system is given by, $W =\alpha \beta^{2} e ^{-\frac{ x ^{2}}{\alpha kT }},$ where $x$ is the displacement, $k$ is the Boltzmann constant and $T$ is the temperature, $\alpha$ and $\beta$ are constants. Then the dimension of $\beta$ will be
    View Solution
  • 10
    Of the following quantities, which one has dimensions different from the remaining three
    View Solution