A mild steel wire of length $2l$ meter cross-sectional area $A \;m ^2$ is fixed horizontally between two pillars. A small mass $m \;kg$ is suspended from the mid point of the wire. If extension in wire are within elastic limit. Then depression at the mid point of wire will be .............
  • A$\left(\frac{M g}{Y A}\right)^{1 / 3}$
  • B$\left(\frac{M g}{1 A}\right)^{1 / 3}$
  • C$\frac{M g}{2 Y A}$
  • D$\left(\frac{M g l^3}{Y A}\right)^{1 / 3}$
Diffcult
art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    A steel wire is $1 \,m$ long and $1 \,mm ^2$ in area of cross$-$section. If it takes $200 \,N$ to stretch this wire by $1 \,mm$, how much force will be required to stretch a wire of the same material as well as diameter from its normal length of $10 \,m$ to a length of $1002 \,cm$ is $........ N$
    View Solution
  • 2
    A wire of length $L$ and radius $r$ is clamped rigidly at one end. When the other end of the wire is pulled by a force $F$, its length increases by $5\,cm$. Another wire of the same material of length $4 L$ and radius $4\,r$ is pulled by a force $4\,F$ under same conditions. The increase in length of this wire is $....cm$.
    View Solution
  • 3
    The pressure of a medium is changed from $1.01 × 10^5$ $Pa$ to $1.165 × 10^5$ $Pa$ and change in volume is $10\% $ keeping temperature constant. The Bulk modulus of the medium is
    View Solution
  • 4
    A steel wire of diameter $0.5 mm$ and Young's modulus $2 \times 10^{11} N m ^{-2}$ carries a load of mass $M$. The length of the wire with the load is $1.0 m$. A vernier scale with $10$ divisions is attached to the end of this wire. Next to the steel wire is a reference wire to which a main scale, of least count $1.0 mm$, is attached. The $10$ divisions of the vernier scale correspond to $9$ divisions of the main scale. Initially, the zero of vernier scale coincides with the zero of main scale. If the load on the steel wire is increased by $1.2 kg$, the vernier scale division which coincides with a main scale division is. . . . Take $g =10 m s ^{-2}$ and $\pi=3.2$.
    View Solution
  • 5
    The Bulk modulus for an incompressible liquid is
    View Solution
  • 6
    If the Young's modulus of the material is $3$ times its modulus of rigidity, then its volume elasticity will be
    View Solution
  • 7
    A rod of length $l$ and radius $r$ is joined to a rod of length $l/2$ and radius $r/2$ of same material. The free end of small rod is fixed to a rigid base and the free end of larger rod is given a twist of $\theta°$, the twist angle at the joint will be
    View Solution
  • 8
    The following four wires are made of same material. Which one will have the largest elongation when subjected to the same tension ?
    View Solution
  • 9
    The increase in length on stretching a wire is $0.05\%$. If its Poisson's ratio is $0.4$, then its diameter
    View Solution
  • 10
    If in case $A$, elongation in wire of length $L$ is $l$, then for same wire elongation in case $B$ will be ......
    View Solution