Question
A parallel-plate capacitor having plate area 25cm2 and separation 1.00mm is connected to a battery of 6.0V. Calculate the charge flown through the battery. How much work has been done by the battery during the process?

Answer


$\text{A}=25\text{cm}^2=2.5\times10^{-3}\text{cm}^2$

$\text{d}=1\text{mm}=0.01\text{m}$

$\text{V}=\text{6V},\ \text{Q}=1$

$\text{C}=\frac{\in_0\text{A}}{\text{d}}=\frac{8.854\times10^{-12}\times2.5\times10^{-3}}{0.01}$

$\text{Q}=\text{CV}=\frac{8.854\times10^{-12}\times2.5\times10^{-3}}{0.01}\times6$

$=1.32810\times10^{-10}\text{C}$

$\text{W}=\text{Q}\times\text{V}=1.32810\times10^{-10}\text{C}\times6$

$=8\times10^{-10}\text{J}.$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Explain, with the help of a circuit diagram, the working of a photo-diode. Write briefly how it is used to detect the optical signals.
If the operating potential in an X-ray tube is increased by 1%, by what percentage does the cutoff wavelength decrease?
The figure below shows the $\text{V-I}$ characteristic of a semiconductor diode.

 

  1. Identify the semiconductor diode used.
  2. Draw the circuit diagram to obtain the given characteristic of this device.
  3. Briefly, explain how this diode can be used as a voltage regulator.
A carrom board (4ft × 4ft square) has the queen at the centre. The queen, hit by the striker moves to the front edge, rebounds and goes in the hole behind the striking line. Find the magnitude of displacement of the queen:
  1. From the centre to the front edge.
  2. From the front edge to the hole.
  3. From the centre to the hole.
A parallel-plate capacitor with plate area 20cm2 and plate separation 1.0mm is connected to a battery. The resistance of the circuit is $10\text{k}\Omega.$ Find the time constant of the circuit.
Estimate the change in the density of water in ocean at a depth of 400m below the surface. The density of water at the surface = 1030kg/m3 and the bulk modulus of water = 2 × 109N/m2.
From molecular view point, discuss the temperature dependence of susceptibility for diamagnetism, paramagnetism and ferromagnetism.
Explain (i) forward biasing, (ii) reverse biasing of a P-N junction diode. With the help of a circuit diagram, explain the use of this device as a half-wave rectifier.
The product of the hole concentration and the conduction electron concentration turns out to be independent of the amount of any impurity doped. The concentration of conduction electrons in germanium is 6 × 1019 per cubic metre. When some phosphorus impurity is doped into a germanium sample, the concentration of conduction electrons increases to 2 × 1023 per cubic metre. Find the concentration of the holes in the doped germanium.
228Th emits an alpha particle to reduce to 224Ra. Calculate the kinetic energy of the alpha particle emitted in the following decay:
$\text{ }^{228}\text{Th}\rightarrow\text{ }^{224}\text{Ra}^*+\alpha$
$\text{ }^{224}\text{Ra}^*\rightarrow\text{ }^{224}\text{Ra}+\gamma(217\text{kev}).$
Atomic mass of 228Th is 228.028726u, that of 224Ra is 224.020196u and that of $\text{ }^4_2\text{He}$ is 4.00260u.