Question
A projectile is thrown with velocity $u$ making angle $\theta$ with vertical. It just crosses the tops of two poles each of height $h$ after $1\,s$ and $3\,s$, respectively. The maximum height of projectile is ............ $m$
✓
Answer
$h =u \cos \theta t_1-\frac{1}{2} g t_1^2 \ldots(1)$
$h =u \cos \theta t_2-\frac{1}{2} g t_2^2 \ldots(2)$
Equating (1) and (2) and substituting the value of $t_1$ and $t_2$ we get
$u \cos \theta=19.6 \;ms ^{-1}$
Maximum height $=\frac{u^2 \cos ^2 \theta}{2 g}=19.6 \;m$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
If an electron is going in the direction of magnetic field $\overrightarrow B $ with the velocity of $\overrightarrow {v\,} $ then the force on electron is
→A closed vessel have a small hole in one face of vessel near the bottom as shown. The velocity of water coming out from the given hole at given instant is ....... $m/s$
→If $T$ be the surface tension, the amount of work done in blowing a soap bubble from a diameter $d$ to diameter $D$ is
→For the network shown in the figure the value of the current $i$ is
→An electric bulb rated for $500\, watts$ at $100\, volts$ is used in a circuit having a $200-volt$ supply. The resistance $R$ that must be put in series with the bulb, so that the bulb draws $500\, W$ is .................. $\Omega$
→$A$ monochromatic light source of wavelength $\lambda$ is placed at $S$. Three slits $S_1, S_2$ and $S_3$ are equidistant from the source $S$ and the point $P$ on the screen. $S_1P - S_2P = \lambda /6$ and $S_1P - S_3P = 2\lambda /3$. If $I$ be the intensity at $P$ when only one slit is open, the intensity at $P$ when all the three slits are open is
→The rate of heat flow through the cross-section of the rod shown in figure is ($T_2 > T_1$ and thermal conductivity of the material of the rod is $K$)
→in circular plate of mass $M$ and radius $R$ has its density varying as $p\left( r \right) = {p_0}\,r$ with $P_0$ as constant and $r$ is the distance from its center. The moment of Inertia of the circular plate about an axis perpendicular to the plate and passing through its edge is $I = aMR^2$ . The value of the coefficient $a$ is
→A black body at $200 K$ is found to exit maximum energy at a wavelength of $14\mu m$. When its temperature is raised to $1000K$ , the wavelength at which maximum energy is emitted is
→A siphon in use is demonstrated in the following figure. The density of the liquid flowing in siphon is $ 1.5 gm/cc. $ The pressure difference between the point $P$ and $S$ will be
→