MCQ
A proton accelerated by a potential difference $500\;KV$ moves though a transverse magnetic field of $0.51\;T$ as shown in figure. The angle $\theta $through which the proton deviates from the initial direction of its motion is......$^o$
  • A
    ${15}$
  • ${30}$
  • C
    ${45}$
  • D
    ${60}$

Answer

Correct option: B.
${30}$
b
(b)According to following figure $\sin \theta = \frac{d}{r}$
also $r = \frac{{\sqrt {2mk} }}{{qB}} = \frac{1}{B}\sqrt {\frac{{2mV}}{q}} $
$\therefore $ $\sin \theta = Bd\sqrt {\frac{q}{{2mV}}} $
$ = 0.51 \times 0.1\sqrt {\frac{{1.6 \times {{10}^{ - 19}}}}{{2 \times 1.67 \times {{10}^{ - 27}} \times 500 \times {{10}^3}}}} $
$ = \frac{1}{2} \Rightarrow \theta = {30^o}$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The electrical circuits used to get smooth d.c. output from a rectifier circuit is called
The critical angle of a medium with respect to air is 45°. The refractive index of medium is
Radius of first Bohr orbit is r. What is the radius of $2^{\text {nd }}$ Bohr orbit?
A current source drives a current in a coil of resistance $R_1$ for a time $t$. The same source drives current in another coil of resistance $R_2$ for same time. If heat generated is same, find internal resistance of source.
An object is placed beyond the centre of curvature ${C}$ of the given concave mirror. If the distance of the object is ${d}_{1}$ from ${C}$ and the distance of the image formed is ${d}_{2}$ from ${C}$, the radius of curvature of this mirror is
The cause of the potential barrier in a $p-n$ diode is:
Demagnetisation of magnets can be done by:
A $9\,V$ stabilised voltage supply is required to run a car stereo system from the car's $12\,V$ battery. A zener diode with $V_z = 9\,V$ and $P_{max} = 0.27\, W$ is to be used as the voltage regulator. The load resistance is $450\,\Omega $. The value of series resistor is....$\Omega $
A parallel plate condenser with oil between the plates (dielectric constant of oil $K = 2$) has a capacitance $C$. If the oil is removed, then capacitance of the capacitor becomes
A coil of self inductance $L$ is connected at one end of two rails as shown in figure. A connector of length $l,$ mass $m$ can slide freely over the two parallel rails . The entire set up is placed in a magnetic field of induction $B$ going into the page. At an instant $t= 0$ an initial velocity $v_0$ is imparted to it and as a result of that it starts moving along $x-$ axis. The displacement of the connector is represented by the figure