MCQ
A rectangular loop is being pulled at a constant speed $v$, through a region of certain thickness $d$, in which a uniform magnetic field $B$ is set up. The graph between position $x$ of the right hand edge of the loop and the induced emf $E$ will be
  • A


  • C

  • D

Answer

Correct option: B.

b
(b) As x increases so $\frac{{dB}}{{dt}}$increases i.e. induced $emf$ $(e)$ is negative. When loop completely entered in the magnetic field, emf =$0$
When it exit out $x$ increases but $\frac{{dB}}{{dt}}$ decreases i.e. $e$ is positive.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

$4$ bulbs marked $40\, W$, $250\, V$ are connected in series with $250\, V$ mains. The total power is ............. $W$
The current in a conductor varies with time t as $I=2 t+3 t^2$ where I is in ampere and t in seconds. Electric charge flowing through a section of the conductor during t = 2 sec to t = 3 sec is
In a thin spherical fish bowl of radius $10 \,cm$ filled with water of refractive index $\left( {\mu = \frac{4}{3}} \right)$ there is a small fish at a distance of $4\, cm$ from the centre $C$ as shown in figure. Where will the image of fish appears, if seen from $E$.....$cm$
A bar magnet of magnetic moment $3.0\ A-m^2$ is placed in a uniform magnetic induction field of $2 × 10^{-5}$ T. If each pole of the magnet experiences a force of $6 × 10^{-4} N$, the length of the magnet is
The surface of a metal is illuminted with the light of $400\ nm$. The kinetic energy of the ejected photoelectrons was found to be $1.68\ eV$. The work function of the metal is ............ $eV$ ($hc=1240$ $ ev$ $ nm$ )
For television broadcasting the frequency employed is normally:
Given,

${R_1} = 1\,\Omega $                     $C_1 \,= 2\,\mu F$

${R_2} = 2\,\Omega $                     $C_2 \,= 4\,\mu F$

The time constants ( in $\mu\, s$) for the circuits $I, II, III$ are respectively

Inversion temperature of a thermocouple is the temperature of the hot junction at which the emf is:
The equivalent resistance between x and y in the circuit shown is
Eddy currents are produced when