A torque meter is calibrated to reference standards of mass, length and time each with $5 \%$ accuracy. After calibration, the measured torque with this torque meter will have net accuracy of$............\%$
JEE MAIN 2022, Medium
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1The radius of a thin wire is $0.16\; mm$. The area of cross-section taking significant figure into consideration in square millimeters is?View Solution
- 2Two full turns of the circular scale of screw gauge cover a distance of $1\,mm$ on scale. The total number of divisions on circular scale is $50$. Further, it is found that screw gauge has a zero error of $+0.03\,mm$. While measuring the diameter of a thin wire a student notes the main scale reading of $3\,mm$ and the number of circular scale division in line, with the main scale is $35$. The diameter of the wire is .......... $mm$View Solution
- 3For the four sets of three measured physical quantities as given below. Which of the following options is correct ?View Solution
$(i)$ $\mathrm{A}_{1}=24.36, \mathrm{B}_{1}=0.0724, \mathrm{C}_{1}=256.2$
$(ii)$ $\mathrm{A}_{2}=24.44, \mathrm{B}_{2}=16.082, \mathrm{C}_{2}=240.2$
$(iii)$ $\mathrm{A}_{3}=25.2, \mathrm{B}_{3}=19.2812, \mathrm{C}_{3}=236.183$
$(iv)$ $\mathrm{A}_{4}=25, \mathrm{B}_{4}=236.191, \mathrm{C}_{4}=19.5$
- 4View SolutionThe dimensions of calorie are
- 5The resistance $R=V / I$ where $V=(100 \pm 5)\;V$ and $I=(10 \pm 0.2) \;A$. Find the percentage error in $R .$View Solution
- 6The circular scale of a micrometer has $200$ divisions and pitch of $2\,mm$ . Find the measured value of thickness of a thin sheet .......... $mm$View Solution
- 7Unit of moment of inertia in $MKS$ systemView Solution
- 8The period of a body under SHM i.e. presented by $T = {P^a}{D^b}{S^c}$; where $P$ is pressure, $D$ is density and $S$ is surface tension. The value of $a,\,b$ and $c$ areView Solution
- 9A small steel ball of radius $r$ is allowed to fall under gravity through a column of a viscous liquid of coefficient of viscosity $\eta $. After some time the velocity of the ball attains a constant value known as terminal velocity ${v_T}$. The terminal velocity depends on $(i)$ the mass of the ball $m$, $(ii)$ $\eta $, $(iii)$ $r$ and $(iv)$ acceleration due to gravity $g$. Which of the following relations is dimensionally correctView Solution
- 10Stokes' law states that the viscous drag force $F$ experienced by a sphere of radius $a$, moving with a speed $v$ through a fluid with coefficient of viscosity $\eta$, is given by $F=6 \pi \eta a v$.If this fluid is flowing through a cylindrical pipe of radius $r$, length $l$ and a pressure difference of $p$ across its two ends, then the volume of water $V$ which flows through the pipe in time $t$ can be written asView Solution
$\frac{v}{t}=k\left(\frac{p}{l}\right)^a \eta^b r^c$
where, $k$ is a dimensionless constant. Correct value of $a, b$ and $c$ are