Question
A transistor is used in an amplifier circuit in common emitter mode. If the base current changes by $100 \,\mu A$, it brings a change of $10 \,mA$ in collector current. If the load resistance is $2 \,k \Omega$ and input resistance is $1 \,k \Omega$, the value of power gain is $x \times 10^{4}$. The value of $x$ is_________

Answer

$\Delta i _{ B }=100 \,\mu A \quad \beta=\frac{\Delta i _{ C }}{\Delta i _{ B }}$

$\Delta i _{ c }=10 \,mA$

power $=\beta^{2} \times \frac{R_{0}}{R_{i n}}$

Power $=\left(\frac{10}{0.1}\right)^{2} \times \frac{2}{1}$

Power $=100 \times 100 \times 2$

Gain $=2 \times 10^{4}$

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Units for constants in Column $-\,I$ and $SI$ unit is given in Column $-\,II$ . Match the followings :
Column $-\,I$ Column $-\,II$
$(a)$ Wein's constant $(i)$ $Wm^{-2}\,K^{-4}$
$(b)$ Stefan-Boltzmaan's constant. $(ii)$ $Wm^{-1}\,K^{4}$
    $(iii)$ $mK$
The pressure on a square plate is measured by measuring the force on the plate and the length of the sides of the plate. If the maximum error in the measurement of force and length are respectively $4\%$ and $2\%$, The maximum error in the measurement of pressure is ....... $\%$
A bullet of mass $m$ moving with velocity $v$ strikes a block of mass $M$ at rest and gets embedded into it. The kinetic energy of the composite block will be
A curve between magnetic moment and temperature of magnet is
For the plane electromagnetic wave given by $\mathrm{E}=\mathrm{E}_0 \sin (\omega \mathrm{t}-\mathrm{kx})$ and $\mathrm{B}=\mathrm{B}_0 \sin (\omega \mathrm{t}-\mathrm{kx})$, the ratio of average electric energy density to average magnetic energy density is
The resistivity of a wire
Which of the following represents an infrared wavelength
The following bodies,

$(1)$ a ring

$(2)$ a disc

$(3)$ a solid cylinder

$(4)$ a solid sphere,

of same mass $m$ and radius $R$ are allowed to roll down without slipping simultaneously from the top of the inclined plane. The body which will reach first at the bottom of the inclined plane is ...........

[Mark the body as per their respective numbering given in the question]

One end of a spring of force constant k is fixed to a vertical wall and the other to a block of mass m resting on a smooth horizontal surface. There is another wall at a distance ${x_0}$ from the black. The spring is then compressed by $2{x_0}$ and released. The time taken to strike the wall is
In the given circuit the input voltage $V _{\text {in }}$ is shown in figure. The cut-in voltage of $p - n$ junction diode ( $D_{1}$ or $D_{2}$ ) is $0.6\,V$. Which of the following output voltage $\left( V _{0}\right)$ waveform across the diode is correct?