Question
A uniform electric field exists between two charged plates as shown in the fig. What should be the work done in moving a charge q along the closed rectangular path ABCDA?

Answer

Work done in an electric field is independent of the path and depends only on the initial and final positions.
Here initial and final points are coincident,
Work = q × (Vfinal - Vinitial)
= q(VA - VA)
So, net work done is zero.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Can virtual image be formed on the retina in a seeing process?
The image of a small electric bulb fixed on the wall of a room is to be obtained on the opposite wall 3 m away by means of a large convex lens. What is the maximum possible focal length of the lens required for the purpose?
Explain the use of transformer for distribution of power over long distances.
As temperature increases, the viscosity of liquids decreases considerably. Will this decrease the resistance of an electrolyte as the temperature increases?
Write any four characteristics of electromagnetic wave.
Answer the following question:
The energy and momentum of an electron are related to the frequency and wavelength of the associated matter wave by the relations:
$\text{E}=\text{h v, p}=\frac{\text{h}}{\lambda}$
But while the value of λ is physically significant, the value of ν (and therefore, the value of the phase speed ν λ) has no physical significance. Why?
When a glass rod is rubbed with a silk cloth, charges appear on both. A similar phenomenon is observed with many other pairs of bodies. Explain how this observation is consistent with the law of conservation of charge.
The two rails of a railway track, insulated from each other and from the ground, are connected to a millivoltmeter. What will be the reading of the millivoltmeter when a train travels on the track at a speed of 180km/h-1? The vertical component of earth's magnetic field is 0.2 × 10-4 T and the rails are separated by 1m.
A steel ball initially at a pressure of 1.0 × 105Pa is heated from 20°C to 120°C keeping its volume constant. Find the pressure inside the ball. Coefficient of linear expansion of steel = 12 × 10-6 °C-1 and bulk modulus of steel = 1.6 × 1011Nm-2.
Find the neutral temperature and inversion temperature of a copper-iron thermocouple if the reference junction is kept at 0°C. Use the data in the table.
 
Metal with
a
b
lead (Pb)
$\mu\text{V}/^\circ\text{C}$
$\mu\text{V}/^\circ(\text{C})^2$
Aluminium
-0.47
0.003
Bismuth
-43.7
-0·47
Copper
2.76
0·012
Gold
2.90
0.0093
Iron
16.6
-0.030
Nickel
19.1
-0.030
Platinum
-1.79
-0.035
Silver
2.50
0.012
Steel
10.8
-0.016