A uniformly tapering conical wire is made from a material of Young's modulus Y and has a normal, unextended length L. The radii, at the

Q: A uniformly tapering conical wire is made from a material of Young's modulus $Y$ and has a normal, unextended length $L.$ The radii, at the upper and lower ends of this conical wire, have values $R$ and $3R,$ respectively. The upper end of the wire is fixed to a rigid support and a mass $M$ is suspended from its lower end. The equilibrium extended length, of this wire, would equal

c Consider a small element $dx$ of radius $r$, $r = \frac{{2R}}{L}x + R$ At equilibrium change in length of the wire $\int\limits_0^l {dL = \int {\frac{{Mgdx}}{{\pi {{\left[ {\frac{{2R}}{L}x + R} \right]}^2}y}}} } $ Taking limit from $0$ to $L$ $\Delta L = \frac{{Mg}}{{\pi y}} - \frac{1}{{\left[ {\frac{{2Rx}}{L} + R} \right]_0^L}} \times \frac{L}{{2R}} = \frac{{MgL}}{{3\pi {R^2}y}}$ The equilibrium extended length of wire $ = L + \Delta L$ $ = L + \frac{{MgL}}{{3\pi {R^2}Y}} = L\left( {1 + \frac{1}{3}\frac{{Mg}}{{\pi Y{R^2}}}} \right)$

SECTION - A [PHYSICS - MCQ]

GSEB - English Medium

A uniformly tapering conical wire is made from a material of Young's modulus $Y$ and has a normal, unextended length $L.$ The radii, at the upper and lower ends of this conical wire, have values $R$ and $3R,$ respectively. The upper end of the wire is fixed to a rigid support and a mass $M$ is suspended from its lower end. The equilibrium extended length, of this wire, would equal

A$L\left( {1 + \frac{2}{9}\frac{{Mg}}{{\pi Y{R^2}}}} \right)$
B$L\left( {1 + \frac{1}{9}\frac{{Mg}}{{\pi Y{R^2}}}} \right)$
C$L\left( {1 + \frac{1}{3}\frac{{Mg}}{{\pi Y{R^2}}}} \right)$
D$L\left( {1 + \frac{2}{3}\frac{{Mg}}{{\pi Y{R^2}}}} \right)$

JEE MAIN 2016, Diffcult

STD 11 Science
NEET
STD 11- 8. mechanical properties of solids
Physics

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Download App

Similar Questions

1
A beam of metal supported at the two ends is loaded at the centre. The depression at the centre is proportional to
View Solution
2
An object is taken $1.0\,km$ deep in sea. Density of sea $= 1.025 \times 10^3\,kg/m^3$ , Bulk modulus of object $= 1.6 \times 10^6\, KPa$ Find out percentage change in density of object....... $\%$
View Solution
3
A rubber pipe of density $1.5 \times {10^3}\,N/{m^2}$ and Young's modulus $5 \times {10^6}\,N/{m^2}$ is suspended from the roof. The length of the pipe is $8 \,m$. What will be the change in length due to its own weight
View Solution

Join the relation of physical quantities in Column$-I$ to the details given in Column$-II$ appropriately :

Column $-I$	Column $-II$
$(a)$ Stress $\propto $ Strain	$(i)$ $M^1\,L^{-1}\,T^{-2}$
$(b)$ Dimensional formula for compressibility	$(ii)$ $M^{-1}\,L^{1}\,T^{-2}$
	$(iii)$ Poisson’s ratio
	$(iv)$ Hooke’s law

View Solution

5
There are two wires of same material and same length while the diameter of second wire is $2$ times the diameter of first wire, then ratio of extension produced in the wires by applying same load will be
View Solution
6
An area of cross-section of rubber string is $2\,c{m^2}$. Its length is doubled when stretched with a linear force of $2 \times {10^5}$dynes. The Young's modulus of the rubber in $dyne/c{m^2}$ will be
View Solution
7
The extension of a wire by the application of load is $3$ $mm.$ The extension in a wire of the same material and length but half the radius by the same load is..... $mm$
View Solution
8
A spherical ball contracts in volume by $0.02 \%$, when subjected to a normal uniform pressure of $50$ atmosphere. The Bulk modulus of its material is ............. $Nm ^{-2}$
View Solution
9
The elastic limit of brass is $3.5 \times 10^{10}\,N / m ^2$. Find the maximum load that can be applied to a brass wire of $0.75\,mm$ diameter without exceeding the elastic limit$.......\times 10^4\,N$
View Solution
10
A force is applied to a steel wire ' $A$ ', rigidly clamped at one end. As a result elongation in the wire is $0.2\,mm$. If same force is applied to another steel wire ' $B$ ' of double the length and a diameter $2.4$ times that of the wire ' $A$ ', the elongation in the wire ' $B$ ' will be $............\times 10^{-2}\,mm$ (wires having uniform circular cross sections)
View Solution

Download our appand get started for free

Similar Questions

Download our app
and get started for free