Question
Basically, the product modulator is (a) An amplifier(b) A mixer(c) A frequency separator(d) A phase separator
✓
Answer
(b) A mixer
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
If two bulbs of wattage 25 and 30, each rated at 220 volts, are connected in series with a 440 volt supply, which bulb will fuse(a) 25 W bulb(b) 30 W bulb(c) Neither of them(d) Both of them
Bell laboratory has developed superconductor at a temperature of:
In a P-type semiconductor, germanium is doped with(a) Boron (b) Gallium(c) Aluminium(d) All of these
The layered lens is made of two kinds of glass. A point source of light is placed on its principal axis. If the reflections from the boundaries between layers are ignored, the lens will form
Heat and work are equivalent. This means:
- When we supply heat to a body we do work on it.
- When we do work on a body we supply heat to it.
- The temperature of a body can be increased by doing work on it.
- A body kept at rest may be set into motion along a line by supplying heat to it.
In the circuit given $E = 6.0 V, R_1 = 100\ ohms, R_2 = R_3 = 50\ ohms, R_4 = 75\ ohms$. The equivalent resistance of the circuit, in $ohms,$ is
→Figure shows an imaginary cube of edge $\frac{\text{L}}{2}.$ A uniformly charged rod of length L moves towards left at a small but constant speed u. At t = 0, the left end just touches the centre of the face of the cube opposite it. Which of the graphs shown in figure represents the flux of the electric field through the cube as the rod goes through it?
→
- a
- b
- c
- d
A concave mirror gives an image three times as large as the object placed at a distance of 20 cm from it. For the image to be real, the focal length should be(a) 10 cm(b) 15 cm(c) 20 cm(d) 30 cm
A parallel plate capacitor of capacity $C _0$ is charged to a potential $V _0$
$(i)$ The energy stored in the capacitor when the battery is disconnected and the separation is doubled $E _1$
$(ii)$ The energy stored in the capacitor when the charging battery is kept connected and the separation between the capacitor plates is doubled is $E _2$ Then $E _1 / E _2$ value is
→$(i)$ The energy stored in the capacitor when the battery is disconnected and the separation is doubled $E _1$
$(ii)$ The energy stored in the capacitor when the charging battery is kept connected and the separation between the capacitor plates is doubled is $E _2$ Then $E _1 / E _2$ value is
For the given circuit of $PN-$junction diode, which of the following statement is correct
→